This research investigates the spanwise oscillation patterns of turbulent non-premixed flames in a tandem configuration, using both experimental methods and large eddy simulations under cross-airflow conditions. Based on the heat release rate (17.43–34.86 kW) and the burner size (0.15 $\times$ 0.15 m), the flame behaves like both a buoyancy-controlled fire (such as a pool fire) and, due to cross-wind effects, a forced flow-controlled fire. The underlying fire dynamics was modelled by varying the spacing between the square diffusion burners, cross-wind velocity and heat release rate. Two flapping modes, the oscillating and bifurcating modes, were observed in the wake of the downstream diffusion flame. This behaviour depends on the wake of the upstream diffusion flame. As the backflow of the upstream flame moved downstream, the maximum flame width of the downstream flame became broader. The flapping amplitude decreased with a stronger cross-wind. Furthermore, the computational fluid dynamics simulation was performed by FireFOAM based on OpenFOAM v2006 2020 to investigate the flapping mechanism. The simulation captured both modes well. Disagreement of the flapping period on the left and right sides results in the oscillating mode, while an agreement of the flapping period results in the bifurcating mode. Finally, the scaling law expressed the dimensionless maximum flame width with the proposed set of basic dimensional parameters, following observations and interpretation by simulations. The results help prevent the potential hazards of this type of basic fire scenario and are fundamentally significant for studying wind-induced multiple fires.

The rupture of a liquid film, where a thin liquid layer between two other fluids breaks and forms holes, commonly occurs in both natural phenomena and industrial applications. The post-rupture dynamics, from initial hole formation to the complete collapse of the film, are crucial because they govern droplet formation, which plays a significant role in many applications such as disease transmission, aerosol formation, spray drying nanodrugs, oil spill remediation, inkjet printing and spray coating. While single-hole rupture has been extensively studied, the dynamics of multiple-hole ruptures, especially the interactions between neighbouring holes, are less well understood. Here, this study reveals that when two holes ‘meet’ on a curved film, the film evolves into a spinning twisted ribbon before breaking into droplets, distinctly different from what occurs on flat films. We explain the formation and evolution of the spinning twisted ribbon, including its geometry, orbits, corrugations and ligaments, and compare the experimental observations with models. We compare and contrast this phenomena with its counterpart on planar films. While our experiments are based on the multiple-hole ruptures in corona splash, the underlying principles are likely applicable to other systems. This study sheds light on understanding and controlling droplet formation in multiple-hole rupture, improving public health, climate science and various industrial applications.

Contactless manipulation of small objects is essential for biomedical and chemical applications, such as cell analysis, assisted fertilisation and precision chemistry. Established methods, including optical, acoustic and magnetic tweezers, are now complemented by flow control techniques that use flow-induced motion to enable precise and versatile manipulation. However, trapping multiple particles in fluid remains a challenge. This study introduces a novel control algorithm capable of steering multiple particles in flow. The system uses rotating disks to generate flow fields that transport particles to precise locations. Disk rotations are governed by a feedback control policy based on the optimising a discrete loss framework, which combines fluid dynamics equations with path objectives into a single loss function. Our experiments, conducted in both simulations and with the physical device, demonstrate the capability of the approach to transport two beads simultaneously to predefined locations, advancing robust contactless particle manipulation for biomedical applications.

The jet from a model-scale, internally mixed nozzle produced a loud howling when operated at jet Mach numbers between 0.80 and 1.00. Discrete tones dominated the noise radiated to the far field and powerful oscillations were present in the jet. To explain these observations, this paper leverages a blend of experimental acoustic and flow measurements and modal analyses thereof via the spectral proper orthogonal decomposition, computational fluid dynamics simulations and local, linear stability analyses of vortex-sheet models for the flow inside the nozzle. This blend of experiments, computations and theory makes clear the cause of the howling, what sets its characteristic frequency and how it may be suppressed. The flow around a small-radius, convex bend just upstream of the final-nozzle exit led to a pocket of locally supersonic flow that was terminated by a shock. The shock was strong enough to separate the boundary layer, but neither the attached nor separated states were stable. A periodic, shock-induced separation of the boundary layer resulted, and this shock-wave/boundary-layer interaction coupled with a natural acoustic mode of the nozzle’s interior in a feedback phenomenon of sorts. Acoustic tones and large flow oscillations were produced at the associated natural frequency of the nozzle’s interior.

Nonlinear dynamical systems often allow for multiple statistically stationary states for the same values of the control parameters. Herein, we introduce a framework that selectively eliminates specific nonlinear triad interactions, thereby suppressing emergence of a particular state, and enabling the emergence of another. The methodology is applied to yield the multiple convection-roll states in two-dimensional planar Rayleigh–Bénard convection (e.g. Wang et al., 2020, Phys. Rev. Lett., vol. 125, 074501) in the turbulent regime. The intrusive framework presented here is based on the observation that the characteristic wavenumber associated with the mean horizontal size of the convection rolls mediates triadic scale interactions resulting in both kinetic energy and temperature variance cascades that are dominant energy transfer processes in a statistically stationary state. Suppression of these cascades mediated by a candidate wavenumber hinders the formation of the convection rolls at that wavenumber. Consequently, convection rolls are formed at another candidate wavenumber which is allowed to mediate energy to establish the cascade processes. In case no stable convection-roll states are possible, this technique does not tend to yield any convection rolls, making it a suitable method for discovering multiple states. Whereas in previous investigations the signature of different states in the initial condition in simulations yielded the multiple states, the present method alleviates such dependence of the emergence of multiple states on initial conditions. It is also demonstrated that accurate predictions of statistical quantities, such as Nusselt number and volume-averaged Reynolds numbers, can also be obtained using this method. The convection-roll states yielded using this technique may be used as initial conditions for direct simulations quickly converging to the target roll state without taking long convergence routes involving state transitions. Additionally, because only one state can possibly emerge in each simulation, this technique can empirically designate each of the multiple states with respect to their stability.

The transient dynamics of a wake vortex, modelled as a strong swirling $q$-vortex, is investigated with a focus on optimal transient growth driven by continuous eigenmodes associated with continuous spectra. The pivotal contribution of viscous critical-layer eigenmodes (Lee and Marcus, J. Fluid Mech. vol. 967, 2023, p. A2) amongst the entire eigenmode families to optimal perturbations is numerically confirmed, using a spectral collocation method for a radially unbounded domain that ensures correct analyticity and far-field behaviour. The consistency of the numerical method across different sensitivity tests supports the reliability of the results and provides flexibility for tuning. Both axisymmetric and helical perturbations with axial wavenumbers of order unity or less are examined through linearised theory and nonlinear simulations, yielding results that align with existing literature on energy growth curves and optimal perturbation structures. The initiation process of transient growth is also explored, highlighting its practical relevance. Inspired by ice crystals in contrails, the backward influence of inertial particles on the vortex flow, particularly through particle drag, is emphasised. In the pursuit of optimal transient growth, particles are initially distributed at the periphery of the vortex core to disturb the flow. Two-way coupled vortex–particle simulations reveal clear evidence of optimal transient growth during ongoing vortex–particle interactions, reinforcing the robustness and significance of transient growth in the original nonlinear vortex system over finite time periods.

Supersonic free jets are extensively employed across a range of applications, especially in high-tech industries such as semiconductor processing and aerospace propulsion. Due to the difficulties involved in flow measurement, previous research on supersonic free jets has primarily focused on investigating near-field shockwave structures, with quantitative experimental analysis of the far-field zone being relatively scarce. However, physical understanding of the far-field flow, particularly post-shockwave energy dissipation, holds significant importance for the application and utilisation of these jets in vacuum environments. Therefore, this study aims to provide a robust experimental foundation for a rarefied supersonic free jet through the analysis of the flow field in both the near- and far-field zones. Nanometre-sized tracer particles and molecules were utilised to measure the rarefied supersonic jet flow field using particle image velocimetry and acetone molecular tagging velocimetry, respectively. The experiments revealed that in rarefied conditions, the supersonic jet exhibits a one-barrel shockwave structure in the near field, and after passing the Mach disk, a long annular viscous layer develops downstream. Experimental data on the jet velocity profile and width demonstrated a transition to a laminar flow regime in the far-field zone. This transition aligns with the theoretically inferred flow regimes based on the complex Reynolds number. The velocity profile and potential core length of the laminar flow regime could be modelled using a bi-modal distribution, which represents the summation of symmetric Gaussian distributions.

Ventilated cavities in the wake of a two-dimensional bluff body are studied experimentally via time-resolved X-ray densitometry. With a systematic variation of flow velocity and gas injection rate, expressed as Froude number ($\textit{Fr}$) and ventilation coefficient ($C_{qs}$), four cavities with different closure types are identified. A regime map governed by $\textit{Fr}$ and $C_{qs}$ is constructed to estimate flow conditions associated with each cavity closure type. Each closure exhibits a different gas ejection mechanism, which in turn dictates the cavity geometry and the pressure in the cavity. Three-dimensional cavity closure is seen to exist for the supercavities at low $\textit{Fr}$. However, closure is nominally two-dimensional for supercavities at higher $\textit{Fr}$. At low $C_{qs}$, cavity closure is seen to be wake-dominated, while supercavities are seen to have interfacial perturbation near the closure at higher $C_{qs}$, irrespective of $\textit{Fr}$. With the measured gas fraction, a gas balance analysis is performed to quantify the gas ejection rate at the transitional cavity closure during its formation. For a range of $\textit{Fr}$, the transitional cavity closure is seen to be characterised by re-entrant flow, whose intensity depends on the flow inertia, dictating the gas ejection rates. Two different ventilation strategies were employed to systematically investigate the formation and maintenance gas fluxes. The interaction of wake and gas injection is suspected to dominate the cavity formation process and not the maintenance, resulting in ventilation hysteresis. Consequently, the ventilation gas flux required to maintain the supercavity is significantly less than the gas flux required to form the supercavity.

Ultra-thin liquid sheets generated by impinging two liquid jets are crucial high-repetition-rate targets for laser ion acceleration and ultra-fast physics, and serve widely as barrier-free samples for structural biochemistry. The impact of liquid viscosity on sheet thickness should be comprehended fully to exploit its potential. Here, we demonstrate experimentally that viscosity significantly influences thickness distribution, while surface tension primarily governs shape. We propose a thickness model based on momentum exchange and mass transport within the radial flow, which agrees well with the experiments. These results provide deeper insights into the behaviour of liquid sheets and enable accurate thickness control for various applications, including atomization nozzles and laser-driven particle sources.

Cavitation bubble pulsation and liquid jet loads are the main causes of hydraulic machinery erosion. Methods to weaken the load influences have always been hot topics of related research. In this work, a method of attaching a viscous layer to a rigid wall is investigated in order to reduce cavitation pulsations and liquid jet loads, using both numerical simulations and experiments. A multiphase flow model incorporating viscous effects has been developed using the Eulerian finite element method (EFEM), and experimental methods of a laser-induced bubble near the viscous layer attached on a rigid wall have been carefully designed. The effects of the initial bubble–wall distance, the thickness of the viscous layer, and the viscosity on bubble pulsation, migration and wall pressure load are investigated. The results show that the bubble migration distance, the normalised thickness of the oil layer and the wall load generally decrease with the initial bubble–wall distance or the oil-layer parameters. Quantitative analysis reveals that when the initial bubble–wall distance remains unchanged, there exists a demarcation line for the comparison of the bubble period and the reference period (the bubble period without viscous layer under the same initial bubble–wall distance), and a logarithmic relationship is observed that $\delta \propto \log_{10} \mu ^*$, where $\delta =h/R_{max}$ is the thickness of the viscous layer h normalised by the maximum bubble radius $R_{max}$, $\mu ^* = \mu /({R_{max }}\sqrt {{\rho }{{\mathop {P}\nolimits } _{{atm}}}})$ is the dynamic viscosity $\mu$ normalised by water density $ \rho $ and atmospheric pressure $P_{atm}$. The results of this paper can provide technical support for related studies of hydraulic cavitation erosion.