Arsenohopeite, ideally Zn3(AsO4)2·4H2O, is the arsenate analogue of hopeite, Zn3(PO4)2·4H2O (it is isostructural with α-hopeite). It was found as a single colourless to blue crystalline grain from the Tsumeb mine, Namibia. The holotype specimen is ∼1 × 1 × 1 mm in size. Arsenohopeite is associated with tiny white fibres of an unidentified Zn- and As-bearing phase. It is orthorhombic, space group Pnma, with a = 10.804(2), b = 19.003(4), c = 5.112(1) Å, V = 1049.5(4) Å3 and Z = 4. Electron microprobe analysis yielded: ZnO 44.92, Fe2O3 0.92, MnO 0.51, MgO 0.20, CuO 0.02, As2O5 45.84 (wt.%). The empirical formula is (Zn2.80Fe0.06Mn0.04Mg0.03)Σ2.93(As1.01O4)2·4H2O, based on 12 oxygen atoms. Optically, the mineral is biaxial negative, with α = 1.598(2), β = 1.606(2), γ = 1.613(2) (white light) and 2Vcalc = 86°. It is not pleochroic or fluorescent. Arsenohopeite is translucent with a vitreous lustre. It is brittle, has an uneven fracture and (by analogy with hopeite) a cleavage that is perfect on {010}, good on {100} and poor on {001}. The calculated density is 3.420 g cm–3. The five strongest calculated powder diffraction lines are [d in Å (I)(hkl)]: 9.502 (100)(020), 2.926 (95)(241), 4.937 (50)(011), 4.110 (48)(230) and 3.567 (31)(240). The crystal structure of arsenohopeite has been solved by direct methods and refined in space group Pnma to R1 = 0.0353. Raman spectroscopy confirms the crystal-structure data and indicates the presence of weak hydrogen bonds.

The crystal structure of zoned philipsbornite – hidalgoite, hexagonal (rhombohedral), Rm , Z = 3: a = 7.1142(4), c = 17.0973(9) A ˚ , V = 749.4(1) Å3, from the Tsumeb mine, Namibia, has been refined to R1 = 1.68% for 301 unique reflections collected on a Bruker D8 three-circle diffractometer equipped with a rotating-anode generator, multilayer optics and an APEX-II CCD detector. Chemical analysis by electron microprobe showed zoned crystals with a rim enriched in S and Fe relative to the core. The core composition is SO3 3.31, As2O5 30.57, Al2O3 23.05, FeO 1.44, PbO 33.94, H2Ocalc 9.58, total 101.79 wt.%, corresponding to Pb0.982+(Al2.92Fe0.132+)(AsO4)[(As0.72S0.27)O3.14(OH)0.85](OH)6; and the rim composition is SO3 8.88, As2O5 22.63, Al2O3 22.90, FeO 2.57, PbO 34.91, H2Ocalc 9.27, total 101.16 wt.%, corresponding to Pb0.992+(Al2.85Fe0.232+)(AsO4)[(As0.25S0.70)O3.30(OH)0.50](OH)6. Philipsbornite – hidalgoite has the alunite-type structure, sheets of corner-sharing octahedra, decorated on top and bottom by [(As,S)O4] and (AsO3OH) tetrahedra, that are linked into a three-dimensional structure by [12]-coordinated Pb2+ cations and hydrogen bonds. A new hydrogen-bonding scheme for the D2+G33+(T5+O4)(TO3OH)(OH)6 minerals is proposed.

Free energies of formation of divalent metal ion zippeïtes, M2(UO2)6(SO4)3(OH)10 ·nH2O, M = Mg,Co,Ni,Zn have been determined from solution studies and metal speciation calculations, in water. It is found that in the compounds, the number of molecules of water of crystallization is equal to 8. This is at variance with a previous report (Frondel et al., 1976), but it has been found that some at least of the water content of zippeite is either nonessential or very loosely bound in the structure. Based on the octahydrate formulation, values are −3506, −12695, −12683 and −12870±4 kJ mol−1 for the Mg,Co,Ni and Zn end-members, respectively. Almost all of the differences in the values are accounted for by those values for the metal ions alone with the exception of Znzippeïte where a discrepancy of some 22 kJ mol−1 is found. Even this value is small however, and the chemical studies indicate that extensive mutual solid solution between all end members is to be expected. These findings agree perfectly with observations on the composition of naturally occurring zippeite minerals of this group.

In Part I of this paper the actual frequency-distribution of igneous rocks as revealed by the latest edition of Washington's collection of analyses was examined, and compared with that of earlier records. An attempt wilt now be made to determine the law of this distribution–a necessary preliminary to any petrogenic application of the results. The silica frequency will be considered since this has been found to give a curve more characteristic of igneous rocks than does any other oxide Now Dr. Harker pointed out that the silica distribution of records published in 1903 did not obey any simple law such as that of the probability curve, and the same conclusion applies to the collection of 1917. However, when the empirical method of Karl Pearson was applied to analyse the curve into component curves of error, fairly simple conclusions resulted.

Nacrite is the rarest member of the kaolin group of minerals. The name was first applied by Brongniart in 1807 to a mineral (talc granuleux of Haüy, 1801) the properties of which were not then adequately described. In 1832 Breithaupt recorded a mineral from an ore vein near Freiberg in Saxony, which has since been called nacrite. In the past, however, 'nacrite' has been applied quite frequently to different nacreous and micaceous minerals, not necessarily of kaolin composition, and the authenticity of the species was not definitely established until 1931 when Ross and Kerr, on the basis of an X-ray study of nacrite from the locality Brand near Freiberg in Saxony, proved the mineral to be a distinct species of the kaolin group.

Lxullianite is well known, at least by name, in this country, and indeed it enjoys an international reputation among petrologists. Its general characters have been described by Bonney and Sir John Flett, while reference to the type is to be found in most standard text-books on petrology. It is, however, a rock of outstanding interest and deserves fuller description and illustration than have yet been accorded it.

The preparation by Mr. A. V. Weatherhead of a large set of thin sections for teaching purposes has given the writer an opportunity of making a more detailed examination of the micropetrology of the rock, with special reference to the manner of the replacement of the several original components.

The new mineral russoite (IMA2015-105), NH4ClAs23+O3(H2O)0.5, was found at the Solfatara di Pozzuoli, Pozzuoli, Napoli, Italy, as a fumarolic phase associated with alacránite, dimorphite, realgar, mascagnite, salammoniac and an amorphous arsenic sulfide. It occurs as hexagonal plates up to ~300 µm in diameter and 15 µm thick, in rosette-like intergrowths. On the basis of powder X-ray diffraction measurements and chemical analysis, the mineral was recognised to be identical to the corresponding synthetic phase NH4ClAs2O3(H2O)0.5. Crystals are transparent and colourless, with vitreous lustre and white streak. Tenacity is brittle and fracture is irregular. Cleavage is perfect on {001}. The measured density is 2.89(1) g/cm3; the calculated density is 2.911 g/cm3. The empirical formula, (based on 4.5 anions per formula unit) is [(NH4)0.94,K0.06]Σ1.00(Cl0.91,Br0.01)Σ0.92As2.02O3(H2O)0.5. Russoite is hexagonal, space group P622, with a = 5.2411(7), c = 12.5948(25) Å, V = 299.62(8) Å3 and Z = 2. The eight strongest X-ray powder diffraction lines are [dobs Å(I)(hkl)]: 12.63(19)(001), 6.32(100)(002), 4.547(75)(100), 4.218(47)(003), 3.094(45)(103), 2.627(46)(110), 2.428(31)(112) and 1.820(28)(115). The structure, was refined to R = 0.0518 for 311 reflections with I > 2σ(I) and shows a different location of the ammonium cation and water molecules with respect to that reported for the synthetic analogue. The mineral belongs to a small group of phylloarsenite minerals (lucabindiite, torrecillasite and gajardoite). It contains electrically neutral As2O3 layers, topologically identical to those found in lucabindiite and gajardoite between which are ammonium cations and outside of which Cl– anions. Water molecules and additional ammonium cations are located in a layer between two levels of chloride anions.

The chemical compositions of eighty granitic rocks from the Lewisian of the North-West Highlands of Scotland, particularly from the Gairloch district, are set out in relation to geological occurrence and their normative proportions of albite, orthoclase, quartz, and anorthite compared with experimental data relating to the systems NaAlSi3O8-KAlSi3O8-SiO2-H2O and KAlSi3O8-NaAlSi2O8-CaAl2Si2O8-SiO2. The field of composition for these Lewisian rocks moves from Ab-Q-rich for autochthonous granites to Ab = Or = Q (approximately) for parautochthonous granites to Or-rich for intrusive granites. This trend is related to the varying roles of mineral solubility under stress, selective melting, and potassium metasomatism.

Pale-blue cordierite (complete analysis given; shows total iron oxides only 0·98 %) occurs in phlogopite schist near White Well (24° 28′ 30″ S. 116° 2′ E.) 20 miles north-west of Yinnietharra, Western Australia. Associated minerals are corundum, dravite, and sillimanite, accessory zircon and rutile. The cordierite is in translucent masses to 8 ×8×4 cm with vitreous lustre, D 2·57, α 1.536, β 1·540, γ 1·543, all colourless, 2Vα80° Unit cell a 17·055, b 9·724, c 9·350 Å. The host phlogopite (complete analysis given) is in brown flakes to 1 cm, D 2·88, α 1·558, β 1·585, γ 1·59, 2Vα 5–20° 1 M polymorph.

Cu K-edge extended X-ray absorption fine structure (EXAFS) spectra have been obtained for two very dilute solutions of copper in hydrosulfide solutions using beamline ID26 at the ESRF. The concentrations of the solutions (4.4 ppm {69 µM} pH 9.5, 1.2 ppm {19 µM} pH 7.4) are such that the experiments illustrate that, with the advent of third generation synchrotron sources, natural systems can now be studied by EXAFS. Analysis of the data indicates an average environment for the copper of 2.3 S atoms at 2.22 Å in the pH 9.5 solution of 2.5 S atoms at 2.23 Å in the pH 7.4 solution. These results are in accord with the solubility study of Mountain and Seward (1999), who conclude that Cu(HS)2− and Cu2(HS)2S2− are the principal copper species in such solutions.

A second occurrence of ferri-fluoro-leakeite has been identified in the Bratthagen nepheline syenite pegmatite (Vestfold County, Norway). With respect to the holotype found at the Verkhnee Espe deposit (Akjailyautas Mountains, Kazakhstan; Cámara et al., 2010), it is closer to the ideal composition because of its larger Li and Mg contents and the absence of an oxo-component; however, it has a significant Zn content (0.29 a.p.f.u.). The ideal formula of ferri-fluoro-leakeite is ANaBNa2 C(Mg2Fe2 3+Li)TSi8O22WF2 and the empirical formula derived from electron-microprobe analysis and single-crystal structure refinement for the sample used here is A(Na0.68K0.32)S=1.00BNa2.00 C(Mg1.69Mn0.25 2+Fe0.24 2+Zn0.29Al0.23Fe1.50 3+Ti0.02Li0.78)S=5.00TSi8O22W(F1.59(OH)0.41)S=2.00. Unitcell data are a = 9.788(2), b = 17.826(3), c = 5.282(1) Å, β = 104.195(5)°, V = 893.5 (3) Å3, Z = 2. Crystal-chemical analysis shows that Li is ordered at the M(3) site and Zn is ordered mainly at the M(2) site, confirming previous findings for Li-bearing amphiboles. The new data also make quantification of the oxo component in Na amphiboles possible.

Kitagohaite, ideally Pt7Cu, is a new mineral from the Lubero region of North Kivu, Democratic Republic of the Congo. The mineral occurs as alluvial grains that were recovered together with other Pt-rich intermetallic compounds and Au. Kitagohaite is opaque, greyish white and malleable and has a metallic lustre and a grey streak. In reflected light, kitagohaite is white and isotropic. The crystal structure of kitagohaite is cubic, space group Fmm, of the Ca7Ge type, with a = 7.7891(3) Å, V = 472.57(5) Å3 and Z = 4. The strongest diffraction lines [d in Å(I)(hkl)] are: 2.246 (100)(222), 1.948(8)(004), 1.377 (77)(044), 1.174(27)(622), 1.123 (31)(444) and 0.893 (13)(662). The Vickers hardness is 217 kg mm−2 (VHN100), which is equivalent to a Mohs hardness of 3½ and the calculated density is 19.958(2) g cm−3. Electron-microprobe analyses gave a mean value (n = 13) of 95.49 wt.% Pt and 4.78 wt.%Cu, which corresponds to Pt6.93Cu1.07 on the basis of eight atoms. The new mineral is named for the Kitagoha river, in the Lubero region.

The form and thickness of the ferrihydrite coating on kaolinite basal surfaces was studied in mixes containing 1–10% ferrihydrite through a combination of TEM, shadowed replicas, selected area electron diffraction, and determinations of surface area and distribution of charge on the surfaces. At pH3 the ferrihydrite was found to attach initially as single particles to certain sites on the kaolinite. These particles grew laterally and vertically until with 4% ferrihydrite they were aggregates of from 8 to 25 layers of particles. With more ferrihydrite the aggregates coalesced. Despite the irregular cover on the kaolinite satisfactory electron diffraction patterns were obtained and as little as 2% ferrihydrite was detected in a mixture at pH3.

The crystal structure of buttgenbachite from Likasi (Congo) was solved by a three- dimensional Patterson function, computed using intensity data collected photographically by the Weissenberg method, and refined by successive Fourier maps and least-squares refinement to an R index 0·055 for 328 independent observed reflections. The cell content resulting from the structural analysis is Cu36·6Cl6·7(NO3)2·6(OH)63·9.2·1 H2O. The space group is P63/mmc with a = 15·750 Å and c = 9·161Å. The buttgenbachite structure is not completely ordered. It consists of a rigid three-dimensional skeleton formed by Cu co-ordination polyhedra sharing edges and corners. The large channels in the framework show a zeolite-like nature; inside the channels the disorder is caused by the different orientations of nitrate groups and by the occurrence of the substitution . The crystal structure of buttgenbachite is closely related to that of connellite. The mechanism of forming an isomorphous series is discussed: the present study shows that the replacement is more complicated than was supposed in the literature.

The new mineral species carducciite, (AgSb)Pb6(As,Sb)8S20, has been discovered in the baryte-pyrite- (Pb-Ag-Zn) deposit of the Pollone mine, near Valdicastello Carducci, Apuan Alps, Tuscany, Italy. It occurs as black metallic prismatic crystals, up to 0.5 mm long, associated with pyrite and sterryite. Its Vickers hardness (VHN10) is 61 kg/mm2 (range: 52–66), corresponding to a Mohs hardness of ~2½–3. In reflected light, carducciite is dark grey in colour, moderately bireflectant; internal reflections are very weak and deep red in colour. Reflectance percentages for the four COM wavelengths [Rmin, Rmax (%) (λ)] are: 35.8, 40.8 (471.1 nm), 33.7, 39.0 (548.3 nm), 32.7, 37.6 (586.6 nm) and 30.4, 35.1 (652.3 nm). Electron microprobe analysis gives (wt.% – mean of six analyses): Ag 3.55(12), Tl 0.13(3), Pb 41.90(42), Sb 17.79(19), As 12.41(14), S 22.10(17), total 97.9(6). On the basis of ΣMe = 16 a.p.f.u., the chemical formula is Ag0.96Tl0.02Pb5.91As4.84Sb4.27S20.14. The main diffraction lines, corresponding to multiple hkl indices, are (relative visual intensity): 3.689 (s), 3.416 (s), 3.125 (s), 2.989 (s), 2.894 (s), 2.753 (vs), 2.250 (s). The crystal-structure study gives a monoclinic unit cell, space group P21/c, with a 8.4909(3), b 8.0227(3), c 25.3957(9) Å, β 100.382(2)°, V 1701.63(11) Å3, Z = 2. The crystal structure has been solved and refined to a final R1 = 0.063 on the basis of 4137 observed reflections. It can be described within the framework of the sartorite homologous series, as formed by chemically twinned layers of the dufrénoysite type. The simplified idealized structural formula, based on 20 sulfur atoms, can ideally be written as (AgSb)Pb6(As,Sb)Σ=8S20. Carducciite is an (Ag,Sb)-rich homeotype of dufrénoysite, stabilized by the complete coupled substitution 2 Pb2+ = Ag+ + Sb3+ on a specific site of the crystal structure. Together with barikaite, it belongs to the rathite sub-group of P21/c homeotypes of dufrénoysite, of which the crystal chemistry is discussed. The distribution of Ag, coupled with As or Sb on specific sites, appears to be the main criterion for the distinction between the three species of this sub-group.

Manganiferous garnets occur in metamorphosed Mn silicate-oxide and silicate-carbonate-oxide rocks of the Sausar Group, India. The garnets of the carbonatic rock show maximum calderite content (∼50 mole%). Increased Ca content in the bulk has been observed to be sympathetically related to the concentration of calderite, rather than the expected andradite component of the garnets. This is the consequence of the preferential partitioning of Ca in coexisting pyroxmangite and/or carbonate. Petrochemical characteristics of the diverse assemblages in response to the physical conditions of metamorphism show that the calderite solubility in manganiferous garnet is not only a function of pressure. Such characteristics only indicate that the mobile components in the bulk influenced the mineralogy of the assemblages at the ambient physical conditions of metamorphism, and this in turn controlled the calderite solubility in garnet.

Metamorphosed troctolite cumulates occur interbedded with Mg-rich metagabbros in the Monviso ophiolitic massif; they have developed chloritoid, omphacite, talc and garnet during the eclogitic stage of the Eo-alpine metamorphism. The lack of penetrative deformation in the rocks has made it possible to recognize different microstructural sites of chloritoid growth, in which the chloritoid composition may vary widely and is controlled by the specific inherited chemical domain.

The chloritoid compositions are unusually rich in Cr and Mg with large variations in Fe2+/Mg and Cr/AlVI ratio. The Cr/Al ratio in chloritoid is linked to both the Cr value of the primary minerals (i.e. Cr-rich spinels, Cr-end-members in the clinopyroxenes) and a limited redistribution of Cr during metamorphism. The Fe2+/Mg ratio, while being partly affected by bulk composition of the host rocks, also varies between different microstructural sites; the highest ratio is recorded in coronas between clinopyroxene and plagioclase, lower values occurring in coronas between plagioclase and olivine.

The first recognition of ankerite as a British mineral seems to have been made a little over fifty years ago by M. F. Heddle, who described and analysed a sample from the Ting of Norwick, Unst. The occurrence of the mineral in veins in the Carboniferous Limestone of Lilleshall, Shropshire, was recorded by C. J. Woodward, who gives analyses of two specimens. T. Crook noted the frequent occurrence of the mineral in British coal-fields and described specimens, with two analyses, from Lancashire, Yorkshire, Nottinghamshire, Leicestershire, and South Wales. F. S. Sinnatt and his collaborators, in their work on the mineral constituents of coal, devote a good deal of attention to the 'white partings' or ankerites, of which, as they say, 'no study has appeared in the literature'.

An X-ray examination of the type specimen of stokesite gave a 14·41, b 11·61, c 5·23 Å.; space-group Pnna. The unit cell contains 4[CaSnSi3O11H4] and is derived from Hutchinson's morphological unit by the transformation [010/001/100]. X-ray powder data are given.