The herbicides that inhibit very-long-chain fatty acid (VLCFA) elongases are primarily used for residual weed control in corn, barley, oat, sorghum, soybean, sugarcane, certain vegetable crops, and wheat production fields in the United States. They act primarily by inhibiting shoot development of susceptible species, preventing weed emergence and growth. The objectives of this review were to summarize 1) the chemical family of VLCFA-inhibiting herbicides and their use in the United States, 2) the VLCFA biosynthesis in plants and their site of action, 3) VLCFA-inhibitor resistant weeds and their mechanism of resistance, and 4) the future of VLCFA-inhibiting herbicides. After their reclassification as Group 15 herbicides to include shoot growth-inhibiting herbicides (Group 8), the VLCFA-inhibiting herbicides are currently represented by eight chemical families (benzofurans, thiocarbamates, α-chloroacetamides, α-oxyacetamides, azolyl-carboxamides, isoxazolines, α-thioacetamides, and oxiranes). On average, VLCFA-inhibiting herbicides are applied once a year to both corn and soybean crops in the United States with acetochlor and S-metolachlor being the most used VLCFA-inhibiting herbicides in corn and soybean production, respectively. The site of action of Group 15 herbicides results from inhibition of the VLCFA synthase, which is encoded by several fatty acid elongase (FAE1)-like genes in VLCFA elongase complex in an endoplasmic reticulum. The VLCFA synthase is a condensing enzyme, and relies on a conserved, reactive cysteinyl sulfur in its active site that performs a nucleophilic attack on either the natural substrate (fatty acyl-CoA) or the herbicide. As of August 2023, 13 weed species have been documented to be resistant to VLCFA inhibitors, including 11 monocot weeds and two dicot weeds (Palmer amaranth and waterhemp). The isoxazolines (pyroxasulfone and fenoxasulfone) are the most recently (2014) discovered VLCFA-inhibiting herbicides. Although the intensity of VLCFA-inhibitor-directed discovery efforts has decreased over the past decade, this biochemical pathway remains a viable mechanistic target for the discovery of herbicide premixes and a valuable component of them.

Herbicide resistance in weeds significantly threatens crop production in the United States. The introduction of dicamba-resistant soybean and cotton stacked with other herbicide tolerance traits has provided farmers with the flexibility of having multiple herbicide options to diversify their weed management practices and delay resistance evolution. XtendiMax® herbicide with VaporGrip® Technology is a dicamba formulation registered for use on dicamba-resistant soybean and cotton crops by the U.S. Environmental Protection Agency (EPA). One of the terms of its registration includes an evaluation of inquiries on reduced weed control efficacy by growers or users of XtendiMax for suspected weed resistance. A total of 3,555 product performance inquiries (PPIs) were received from 2018 to 2021 regarding reduced weed control efficacy by dicamba. Following the criteria recommended by EPA for screening of suspected resistance in the field, a total of 103 weed accessions from 63 counties in 13 states were collected for greenhouse testing over those 4 yr. Weed accessions for greenhouse testing were collected only in states where resistance to dicamba was not yet confirmed in the weed species under investigation. The accessions, which consisted primarily of waterhemp and Palmer amaranth, were treated with dicamba at rates of 560 g ae ha−1 and 1,120 g ae ha−1. All weed accessions, except for one accession each of Palmer amaranth and waterhemp, were controlled by ≥90% with dicamba at 21 d after treatment in the greenhouse.

Herbicide resistance in Palmer amaranth and waterhemp is on the rise and poses a great concern to growers in the United States. A multistate screening was conducted for these two weed species in the United States to assess their sensitivity to glufosinate, dicamba, and 2,4-D. The screening was designed to understand the weed sensitivity landscape and emerging trends in resistance evolution by testing each herbicide at its respective label rate and at half the label rate. A total of 303 weed seed accessions from 21 states representing 162 Palmer amaranth and 141 waterhemp seeds were collected from grower fields in 2019 and screened in greenhouse conditions. Statistical power of different sample sizes and probability of survivors in each accession were estimated for each species and herbicide treatment. Overall, the efficacy of glufosinate, dicamba, and 2,4-D against all these accessions was excellent, with greater than 90% average injury. The variability in herbicide injury, if any, was greater with half the label rate of 2,4-D in some Palmer amaranth accessions, while waterhemp accessions had exhibited variable sensitivity with half the label rate of dicamba and glufosinate. The study highlights the value of monitoring weeds for herbicide sensitivity across broader landscape and the importance of glufosinate, dicamba, and 2,4-D herbicides in managing troublesome weeds as part of a diversified weed control program integrated with other chemical, mechanical and cultural practices.

Cotton and soybean growers were offered new technologies in 2016, expanding in-crop herbicide options to include dicamba or 2,4-D. Within 3 yr of commercialization, dicamba use in these crops increased 10-fold, and growers began to report Palmer amaranth escapes in dicamba-tolerant production systems in western Tennessee. In 2020, Palmer amaranth seed was collected from eight Tennessee locations where growers witnessed poor control following dicamba. Greenhouse experiments were conducted to evaluate the response of these Palmer amaranth populations to dicamba. In 2021, field experiments were conducted on two tentative dicamba-susceptible populations in Georgia, on three confirmed dicamba-resistant populations in Tennessee, and on a tentative dicamba-susceptible population in Texas to evaluate cotton response following dicamba and to examine if malathion insecticide (a cytochrome P450 inhibitor) would improve weed control and not reduce cotton yield when applied in conjunction with dicamba. Palmer amaranth populations collected in 2020 survived dicamba in the greenhouse at 1, 2, and 4 times the labeled rate. Five Palmer amaranth populations exhibited 15% to 26% survival to the labeled dicamba rate (560 g ha−1) in the greenhouse. These findings were reinforced in the field when research on three of those populations in 2021 showed 55% control with the labeled dicamba rate and 69% control with 2 times the labeled rate. This demonstrates that the dicamba resistance allele or alleles were passed between generations. This result was not consistent in the Macon County, GA, or Worth County, GA, locations, where malathion improved dicamba control of 15- to 38-cm-tall Palmer amaranth. Cotton injury was observed when malathion was applied in combination with dicamba. These results further document the evolution of dicamba-resistant Palmer amaranth in Tennessee. Moreover, the nonreversal of resistance phenotype by malathion may suggest that the resistance mechanism is something other than metabolism.

Off-target movement of 2,4-D and dicamba is sometimes to blame as the cause of symptoms observed in weeds growing in production fields. Pesticide regulatory authorities routinely sample tissues of weeds or crops from fields under investigation for potential illegal use of auxin herbicides. This research aimed to determine if analytical tests of herbicide residue on soybean or Palmer amaranth vegetation treated with dicamba or 2,4-D could be used to differentiate between rates applied and how the residue levels decay over a 1-mo interval. Four rates of each herbicide (1X, 0.1X, 0.01X, and 0.001X) were applied, with a 1X rate of dicamba and 2,4-D assumed to be 560 and 1,065 g ae ha−1, respectively. Experiments included dicamba- and 2,4-D-resistant soybean (Xtend® and Enlist® traits, respectively) and Palmer amaranth categorized by size (8 to 15 cm, 20 to 30 cm, and 35 to 50 cm in height). Analytical results show that herbicide residues were detected above detection limits of 0.04 µg g−1 for dicamba and 0.004 µg g−1 for 2,4-D, respectively, particularly for samples treated with a 1X and 0.1X rate of dicamba or 2,4-D. Nondetections were frequent, even as early as 2 to 3 d after treatment (DAT), with 0.01X and 0.001X rates of 2,4-D or dicamba. Residues declined rapidly on Xtend® soybean treated with dicamba and on Enlist® soybean treated with 2,4-D. The severity of auxin symptomology generally agreed with the ability to detect dicamba or 2,4-D residue in plant tissue for Palmer amaranth, whereas for soybean, this was not always the case. Hence detecting dicamba or 2,4-D residues in both Palmer amaranth and soybean vegetation, along with visible symptoms on both plants during investigations, would generally indicate an earlier direct application of the auxin herbicide rather than off-target movement being the cause of detection.

Six field experiments were established in southwestern Ontario in 2021 and 2022 to evaluate whether the addition of a grass herbicide (acetochlor, dimethenamid-p, flufenacet, pendimethalin, pyroxasulfone, or S-metolachlor) to tolpyralate + atrazine improves late-season weed control in corn. Tolpyralate + atrazine caused 12% and 5% corn injury at 1 and 4 wk after herbicide application (WAA); corn injury was not increased with the addition of a grass herbicide. Weed interference reduced corn yield 60%. The addition of a grass herbicide to tolpyralate + atrazine did not enhance velvetleaf control. The addition of acetochlor or dimethenamid-p to tolpyralate + atrazine enhanced pigweed species control 4% 4 WAA; the addition of other grass herbicides tested did not increase pigweed species control. The addition of acetochlor enhanced common ragweed control 5% at 4 WAA, and the addition of acetochlor or dimethenamid-p enhanced common ragweed control 8% at 8 WAA; the addition of other grass herbicides did not improve common ragweed control. The addition of acetochlor to tolpyralate + atrazine enhanced common lambsquarters control up to 4%; there was no enhancement in common lambsquarters control with the addition of the other grass herbicides. Tolpyralate + atrazine controlled barnyardgrass 90% and 78% at 4 and 8 WAA, respectively; the addition of a grass herbicide enhanced barnyardgrass control 9% to 10% and 21% at 4 and 8 WAA, respectively. Tolpyralate + atrazine controlled green or giant foxtail 80% and 69% at 4 and 8 WAA, respectively; the addition of a grass herbicide enhanced foxtail species control 15% to 19% and 24% to 29% at 4 and 8 WAA, respectively. This research shows that adding a grass herbicide to tolpyralate + atrazine mixture can improve weed control efficacy, especially increased annual grass control in corn production.

With the increase in hectares planted to auxin-resistant cotton, the number of preplant, at-plant, and postplant applications of dicamba and 2,4-D choline to aid in the control of troublesome broadleaf weeds, including glyphosate-resistant Palmer amaranth, has increased. More dicamba and 2,4-D choline applications mean an increased risk of off-target movement. Field studies were conducted in 2019 to 2021 at the Texas Tech University New Deal Research Farm to evaluate dicamba-resistant cotton response to various rates of 2,4-D choline when applied at four growth stages (first square [FS] + 2 wk, first bloom [FB], FB + 2 wk, and FB + 4 wk). Applications of 2,4-D choline were applied at 1,060 (1X), 106 (1/10X), 21 (1/50X), 10.6 (1/100X), 2.1 (1/500X), and 1.06 (1/1000X) g ae ha−1 to Deltapine 1822 XF cotton. Relative to the nontreated control, yield losses were observed in all years at FS + 2 wk and FB from rates of 2,4-D choline ≥ 1/100X. At the FB + 4 wk application, only the 1X rate of 2,4-D choline resulted in a yield reduction in all three years. Micronaire, fiber length, and uniformity were negatively influenced by the 1/10X and 1X rates of 2,4-D choline at various timings in 2019, 2020, and 2021. In addition, short fiber content, neps, and seed coat neps increased where micronaire, fiber length, and uniformity were negatively impacted.

Field studies were conducted to assess the efficacy of physical weed management of Palmer amaranth management in cucumber, peanut, and sweetpotato. Treatments were arranged in a 3 × 4 factorial in which the first factor included a treatment method of electrical, mechanical, or hand-roguing Palmer amaranth control and the second factor consisted of treatments applied when Palmer amaranth was approximately 0.3, 0.6, 0.9, or 1.2 m above the crop canopy. Four wk after treatment (WAT), the electrical applications controlled Palmer amaranth at least 27 percentage points more than the mechanical applications when applied at the 0.3- and 0.6-m timings. At the 0.9- and 1.2-m application timings 4 WAT, electrical and mechanical applications controlled Palmer amaranth by at most 87%. Though hand removal generally resulted in the greatest peanut pod count and total sweetpotato yield, mechanical and electrical control resulted in similar yield to the hand-rogued plots, depending on the treatment timing. With additional research to provide insight into the optimal applications, there is potential for electrical control and mechanical control to be used as alternatives to hand removal. Additional studies were conducted to determine the effects of electrical treatments on Palmer amaranth seed production and viability. Treatments consisted of electricity applied to Palmer amaranth at first visible inflorescence, 2 wk after first visible inflorescence (WAI) or 4 WAI. Treatments at varying reproductive maturities did not reduce the seed production immediately after treatment. However, after treatment, plants primarily died and ceased maturation, reducing seed production assessed at 4 WAI by 93% and 70% when treated at 0 and 2 WAI, respectively. Treatments did not have a negative effect on germination or seedling length.

Soybean is the world’s most widely grown leguminous crop and is an important source of oil and protein for food and feed in addition to other industrial uses. However, herbicide-resistant and troublesome weed control challenges limit yield potential and threaten conservation tillage (CT) systems. Cover crops have been widely adopted as an integrated pest management component in CT systems to suppress weeds and maintain soybean yield potential. A 3-yr field experiment was conducted to estimate the influence of a cereal rye cover crop following CT on the critical period for weed control (CPWC) in soybean. The experiment was implemented in a split-plot design in which main plots as CT following cover crop (CT + CC), CT following winter fallow (CT + WF), and conventional tillage (CVT), and subplots were multiple durations of weed-free and weed interference. Results showed that the estimated CPWC of CT + CC and CT + WF treatments was 0 wk and >7 wk, respectively, in 2018. In 2019, the estimated CPWC was 0 wk, 5.0 wk, and 1.3 wk under CT + CC, CT + WF, and CVT treatments, respectively. In 2020, the estimated CPWC was 3.5 wk, >6.2 wk, and 0 wk under CT + CC, CT + WF, and CVT treatments, respectively. The presence of a cover crop delayed the CTWR and caused an early beginning of the CWFP compared with CT + WF treatment, and hence shortened the CPWC in 2018 and 2019. In conclusion, the CT + WF system did not reduce the weed competition and subsequent yield loss in soybean compared to the CT + CC system.

The threat of herbicide-resistant weed species, such as Palmer amaranth, has driven the development of robust weed management programs that rely on more than chemicals for weed control. Previous research has shown that zero-tolerance weed thresholds, cover crops, deep tillage, and diverse herbicide programs are effective strategies for controlling Palmer amaranth. Unfortunately, research investigating the integration of all four of these weed management strategies in a system is lacking. To better leverage these integrated weed management strategies in cotton production systems, a long-term study was initiated in fall 2018 near Marianna, AR, with zero tolerance, deep tillage, a cereal rye cover crop, and either a dicamba or non-dicamba in-crop herbicide program as factors. Results found that total Palmer amaranth emergence was reduced 76% as the result of deep tillage in 2019 and, in the absence of a zero-tolerance strategy, 73% in 2020. In the absence of a zero-tolerance strategy, the combination of a non–cover crop strategy and dicamba herbicide program decreased total Palmer amaranth emergence by 73%, while the combination of a cover crop strategy and dicamba herbicide program decreased total Palmer amaranth emergence by 78% compared to the combination of a cover crop and non-dicamba herbicide program. Under a zero-tolerance strategy in 2019, tillage reduced cotton yield by 12% and partial returns by US$370 ha−1. In 2020, tillage reduced cotton yield by 14% and partial returns of US$371 ha−1 under a non-zero-tolerance strategy, while a 12% yield reduction and a US$260 ha−1 decrease in partial returns were observed under a zero-tolerance strategy. In 2019, the non-dicamba program resulted in greater partial returns than the dicamba in-crop program because of greater yield and lower program costs. However, in 2020, partial returns were greater for the dicamba in-crop herbicide program owing to greater yields achieved by this program.

Palmer amaranth has a long history of evolving resistance to herbicides to the point at which it has become a significant obstacle to row crop production. A survey of Palmer amaranth escapes in dicamba-resistant cotton and soybean fields in Tennessee was conducted in fall 2021 with the objective of determining whether poor control was due to environmental phenomena or the development of dicamba resistance. A greenhouse dicamba dose-response screen was conducted on 15 Tennessee accessions. Three accessions were identified with a relative resistance factor between 1.85 and 2.49, and one accession from Lauderdale County was found with a relative resistance factor of 14.25. The Lauderdale County 1 accession developed a higher dicamba resistance level than all others evaluated and can no longer be effectively controlled using dicamba. The history of Palmer amaranth escaping dicamba in the Lauderdale County 1 location from 2019 to 2021 in the field and in preliminary greenhouse screens would suggest that the dicamba resistance has passed between generations. This research documents the first findings of Palmer amaranth control failures in cotton and soybean fields due to the evolution of dicamba resistance.

Small-seeded vegetable crop production is challenged by poor emergence, stand establishment and canopy development, as well as a lack of effective weed control options. The potential use of plant growth regulators such as gibberellic acid (GA) could enhance early emergence and growth rates while potentially synchronizing weed germination with control tactics. In response, a controlled environment study was conducted to investigate the effects of GA on garden beet, cabbage, carrot, and onion. At 7 d after seeding (DAS) carrot emergence was greater when carrot seeds were treated with 2, 4, 8, 16, or 64 ppm GA compared with nontreated seeds. Total carrot emergence over the study period was 14% greater when seeds were treated with 4 ppm GA compared with nontreated seeds. Treatment of cabbage with as low as 2 to 4 ppm GA increased cabbage emergence rate and total plant emergence over the study period relative to nontreated seeds. Onion response to GA treatment was variable and unremarkable and was hypothesized to be influenced by seed dormancy because emergence was also low with the nontreated seeds. The GA rates that stimulated vegetable crop seed germination and emergence were then explored with three common weed species to determine whether a similar response was observed. If so, GA could be used to stimulate weed emergence in synchrony with management tactics. Palmer amaranth emergence was strongly affected by GA treatment, whereby the total number of emerged plants was 48% greater when 4 ppm GA was applied than in the nontreated check. Velvetleaf emergence at 3 DAS with the 4 and 8 ppm GA was 2.9 and 3.0 plants pot−1, respectively, compared to no emergence in the nontreated pots. Redroot pigweed emergence was not affected by GA treatment at any rate.

Dicamba and glufosinate are among the few effective postemergence herbicides to control multiple herbicide-resistant weeds in southeastern U.S. cotton and soybean production. Field studies were conducted to determine the effect of weed size and the application of dicamba and glufosinate individually, mixed, or sequentially on common ragweed, goosegrass, large crabgrass, ivyleaf morningglory, Palmer amaranth, and sicklepod control. Sequential herbicide treatments were applied 7 d after the initial treatment. The tested weeds sizes predominantly did not affect weed control. Control of broadleaf weed species with sequential herbicide applications never increased compared to the initial herbicide application. Two applications of glufosinate and/or dicamba + glufosinate controlled grasses better than one application. The order of the herbicides in the sequential applications did not affect broadleaf species control, whereas herbicide order was important for the control of grass weeds. Grass weed control was higher when glufosinate was applied before dicamba. Dicamba + glufosinate additively controlled the weeds, except for goosegrass, for which control was less for dicamba + glufosinate compared to glufosinate alone. The results of the experiment provide evidence that dicamba and glufosinate applied individually, mixed, and sequentially are effective on common row crop weeds found in the southeastern United States, but the species present may dictate how the herbicides are applied together.

The herbicides that inhibit 4-hydroxyphenylpyruvate dioxygenase (HPPD) are primarily used for weed control in corn, barley, oat, rice, sorghum, sugarcane, and wheat production fields in the United States. The objectives of this review were to summarize 1) the history of HPPD-inhibitor herbicides and their use in the United States; 2) HPPD-inhibitor resistant weeds, their mechanism of resistance, and management; 3) interaction of HPPD-inhibitor herbicides with other herbicides; and 4) the future of HPPD-inhibitor-resistant crops. As of 2022, three broadleaf weeds (Palmer amaranth, waterhemp, and wild radish) have evolved resistance to the HPPD inhibitor. The predominance of metabolic resistance to HPPD inhibitor was found in aforementioned three weed species. Management of HPPD-inhibitor-resistant weeds can be accomplished using alternate herbicides such as glyphosate, glufosinate, 2,4-D, or dicamba; however, metabolic resistance poses a serious challenge, because the weeds may be cross-resistant to other herbicide sites of action, leading to limited herbicide options. An HPPD-inhibitor herbicide is commonly applied with a photosystem II (PS II) inhibitor to increase efficacy and weed control spectrum. The synergism with an HPPD inhibitor arises from depletion of plastoquinones, which allows increased binding of a PS II inhibitor to the D1 protein. New HPPD inhibitors from the azole carboxamides class are in development and expected to be available in the near future. HPPD-inhibitor-resistant crops have been developed through overexpression of a resistant bacterial HPPD enzyme in plants and the overexpression of transgenes for HPPD and a microbial gene that enhances the production of the HPPD substrate. Isoxaflutole-resistant soybean is commercially available, and it is expected that soybean resistant to other HPPD inhibitor herbicides such as mesotrione, stacked with resistance to other herbicides, will be available in the near future.

Herbicide-resistant Palmer amaranth is a troublesome weed in several agronomic crops and is a relatively new challenge to dry bean production in western Nebraska. Objectives were to evaluate preemergence (PRE) and postemergence (POST) herbicides for control of acetolactate synthase–resistant Palmer amaranth and their effect on Palmer amaranth density and biomass as well as dry bean injury and yield in western Nebraska. Field experiments were conducted in 2017 and 2019 near Scottsbluff, NE. The experiments were arranged as a two-factor strip-plot design. The strip-plot factor consisted of no-PRE or pendimethalin (1,070 g ai ha–1) + dimethenamid-P (790 g ai h–1) applied PRE. The main-plot factor was POST herbicides, which consisted of various mixtures of imazamox, bentazon, or fomesafen applied in a single or sequential application at labeled rates, and reduced rates of imazamox (9 g ai ha–1) + bentazon (314 g ai ha–1) + fomesafen (70 g ai ha–1) applied in single or sequential (two or three) applications. PRE herbicides reduced Palmer amaranth density and biomass during both years and increased dry bean yield in 2017. POST treatments containing fomesafen improved Palmer amaranth control compared with treatments containing imazamox and bentazon only. The sequential-application reduced-rate POST system did not improve Palmer amaranth control compared to one POST application containing fomesafen at a labeled rate in either year. Using pendimethalin + dimethenamid-P PRE followed by POST treatments containing imazamox + bentazon + fomesafen at a labeled rate provided 86% and 99% Palmer amaranth control in 2017 and 2019, respectively.

The southern United States produces 90% of the nation’s cotton, and the Texas High Plains is the largest contiguous cotton producing region. Since 2011, glyphosate-resistant Palmer amaranth has complicated cotton production, and alternatives to glyphosate are needed. Integrating soil residual herbicides into a weed management program is a crucial step to control glyphosate resistant weeds before emergence. The recent development of p-hydroxyphenylpyruvate dioxygenase (HPPD)-resistant cotton by BASF Corporation may allow growers to use isoxaflutole in future weed management programs. In 2019 and 2020, field experiments were conducted in New Deal, Lubbock, and Halfway, Texas, to evaluate HPPD-resistant cotton response to isoxaflutole applied preemergence (PRE) or early postemergence (EPOST) and to determine the efficacy of isoxaflutole when used as part of a season-long weed management program. At the New Deal location, cotton response was observed following the EPOST application, but it never exceeded 10%. Cotton response was greatest following the PRE application in Lubbock in 2019 but did not exceed 14%. In 2020 in Lubbock, cotton was replanted due to severe weather. There was <1% cotton response following the PRE application, and maximum cotton response observed was 9% following EPOST and mid-postemergence (MPOST) applications. Cotton lint yields were not different from those of the nontreated, weed-free control at either location. In non-crop weed control studies in Halfway, all treatments controlled Palmer amaranth ≥94% 21 d after the EPOST application. Twenty-one days after the MPOST treatment, systems with isoxaflutole applied EPOST controlled Palmer amaranth by 88% to 93%, while systems with isoxaflutole PRE controlled Palmer amaranth by 94% to 98%. End-of-season Palmer amaranth control was lowest in the system without isoxaflutole (88%) and when isoxaflutole was used EPOST (88% to 91%). These studies suggest that the use of isoxaflutole in cotton weed management systems may improve season-long control of several troublesome weeds with no adverse effects on cotton yield and quality.

Narrow-windrow burning (NWB) is a form of harvest weed seed control in which crop residues and weed seeds collected by the combine are concentrated into windrows and subsequently burned. The objectives of this study were to determine how NWB will 1) affect seed survival of Italian ryegrass in wheat and Palmer amaranth in soybean and 2) determine whether a relationship exists between NWB heat index (HI; the sum of temperatures above ambient) or effective burn time (EBT; the cumulative number of seconds temperatures exceed 200 C) and the post-NWB seed survival of both species. Average soybean and wheat windrow HI totaled 140,725 ± 14,370 and 66,196 ± 6224 C, and 259 ± 27 and 116 ± 12 s of EBT, respectively. Pre-NWB versus post-NWB germinability testing revealed an estimated seed kill rate of 79.7% for Italian ryegrass, and 86.3% for Palmer amaranth. Non-linear two-parameter exponential regressions between seed kill and HI or EBT indicated NWB at an HI of 146,000 C and 277 s of EBT potentially kills 99% of Palmer amaranth seed. Seventy-six percent of soybean windrow burning events resulted in estimated Palmer amaranth seed kill rates greater than 85%. Predicted Italian ryegrass seed kill was greater than 97% in all but two wheat NWB events; therefore, relationships were not calculated. These results validate the effectiveness of the ability of NWB to reduce seed survival, thereby improving weed management and combating herbicide resistance.

The use of different herbicide-resistant soybean technologies in proximity could lead to injury and yield loss due to an application error. Research was initiated to evaluate the effect of 6.25%, 12.5%, and 100% doses of isoxaflutole and mesotrione field use doses applied postemergence to 4-hyroxyphenylpyruvate (HPPD) inhibitor-susceptible soybean, representing physical drift or misapplication doses. Visible injury manifested as chlorosis with slight necrosis, progressing to necrosis and height reduction, with visible height reduction as the only symptom. Isoxaflutole at 6.25% and 12.5% injured V2 soybean more than V1 or V4 soybean at all evaluation dates. This is supported by soybean height data at 14, 28, and 42 d after treatment (DAT). Following the 100% dose, maximum injury occurred at 28 DAT with V1, V2, and V4 soybean injured 90%, 85%, and 72%, but injury declined over time. All isoxaflutole treatments reduced yield at least 310 kg ha−1, with no differences among application timings or between the two lowest doses for a revenue loss of US$147 ha−1 to US$623 ha−1. Visible injury following mesotrione manifested as chlorosis and necrosis advancing to visible height reduction. Following mesotrione at 6.25% and 12.5%, injury ranged from 20% to 36% among application timings and did not differ at 3 to 21 DAT. Soybean heights at 28 and 42 DAT do not support injury observations; therefore, the greater injury was due to chlorosis and necrosis. Following mesotrione at 100%, sensitivity decreased at 3 to 14 DAT when applied to later growth stages, with no differences at 42 DAT. Yields did not differ among application timings, but yield losses were at least 240 kg ha−1, with revenue losses of US$60 ha−1 and US$373 ha−1. Producers are cautioned to prevent off-target movement or errant application of isoxaflutole or mesotrione to HPPD inhibitor-susceptible soybean.

A field experiment was conducted in 2019 and 2020 that included six site-years and four locations in Arkansas to determine the optimal sequence and timing of dicamba and glufosinate applications when applied alone, sequentially, or in combination to control Palmer amaranth by size: labeled (<10 cm height) and non-labeled (13 to 25 cm height). Single applications of dicamba, glufosinate, and dicamba plus glufosinate (not labeled) resulted in less than 80% Palmer amaranth control, regardless of weed size. The mixture of dicamba plus glufosinate was antagonistic for Palmer amaranth control and percent mortality. Sequential applications, averaged over all time intervals and herbicides, improved the percentage of Palmer amaranth control 11 to 17 percentage points over a single application, regardless of weed size at application 28 d after final application (DAFA). Palmer amaranth control with glufosinate followed by (fb) glufosinate and dicamba fb dicamba, pending weed size, were optimized at intervals of 7 d, and 14 to 21 d, respectively. Because single site of action (SOA) postemergence herbicide systems increase the likelihood of the development of resistant biotypes and are not a best management practice (BMP) in that regard; sequential applications involving both dicamba and glufosinate were more effective. Furthermore, the sequence of application mattered with a preference for applying dicamba first. Dicamba fb glufosinate at a 14-d interval was profit-maximizing and the only herbicide treatment that resulted in 100% weed control when size was <10 cm. For larger weed sizes, economic analysis revealed that dicamba fb dicamba performed better than dicamba fb glufosinate when no penalty was assigned for using a single SOA. This resulted in greater yield loss risk and soil weed seed bank in comparison to timelier weed control with the smaller weed size. Hence, timely weed control and two SOAs to control Palmer amaranth are recommended as BMPs that reduce producer risk.

Palmer amaranth is a common weed on levees in rice fields but has become increasingly problematic with the adoption of furrow-irrigated rice and lack of an established flood. Florpyrauxifen-benzyl previously has been found effective for controlling Palmer amaranth in rice, but the efficacy of low rates of florpyrauxifen-benzyl and the effect of Palmer amaranth size on controlling it is unknown. The objective of this research was to determine the level of Palmer amaranth control expected with single and sequential applications of florpyrauxifen-benzyl at varying weed heights. The first study was conducted near Marianna, AR, in 2019 and 2020, to determine the effect of florpyrauxifen-benzyl rate on control of <10 cm (labeled size) and 28- to 32-cm-tall (larger-than-labeled size) Palmer amaranth. The second experiment was conducted in 2020 at two locations in Arkansas to compare single applications of florpyrauxifen-benzyl at low rates to sequential applications at the same rates with a 14-d interval on 20- and 40-cm-tall Palmer amaranth. Results revealed that florpyrauxifen-benzyl at 15 g ae ha−1 was as effective as 30 g ae ha−1 in controlling <10-cm-tall Palmer amaranth (92% and 95% mortality in 2019). Sequential applications of florpyrauxifen-benzyl at 8 g ae ha−1 were as effective as single or sequential applications at 30 g ae ha−1. However, no rate of florpyrauxifen-benzyl applied to 20- or 40-cm-tall Palmer amaranth was sufficient to provide season-long control of the weed, with the escaping female plants producing as many as 6,120 seed per plant following a single application.