Hostname: page-component-68c7f8b79f-m4fzj Total loading time: 0 Render date: 2025-12-30T02:48:12.539Z Has data issue: false hasContentIssue false
  • English
  • Français

Switching Behavior in p-Type Hydrogenated Amorphous Silicon with One and Two Blocking Contacts

Published online by Cambridge University Press:  01 February 2011

Jian Hu ,
Howard M. Branz ,
Richard S. Crandall ,
Scott Ward  and
Qi Wang
Jian Hu
Affiliation:
National Renewable Energy Laboratory Golden, CO 80401, USA
Howard M. Branz
Affiliation:
National Renewable Energy Laboratory Golden, CO 80401, USA
Richard S. Crandall
Affiliation:
National Renewable Energy Laboratory Golden, CO 80401, USA
Scott Ward
Affiliation:
National Renewable Energy Laboratory Golden, CO 80401, USA
Qi Wang
Affiliation:
National Renewable Energy Laboratory Golden, CO 80401, USA
Get access

Abstract

We compare switching behaviour in Cr/a-Si:H(p)/Ag and c-Si(p)/a-Si:H(p)/Ag structures containing p-type hydrogenated amorphous silicon. The a-Si:H layer is made by hot wire chemical vapor deposition. We observed that the switching is polarity-dependent only in the sample on c-Si(p). Switching to a low-resistance state occurs at 0.4 mA/cm2 when any of the metal contacts are biased positive. When the c-Si(p) is biased positive holes are injected and no switching occurs even up to 4 A/cm2. We suggest that the switching requires a blocking metal/a-Si(p), possibly because local electrical breakdown initiates metal filament formation.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 715: Symposium A – Amorphous and Heterogeneous Silicon-Based Films-2002 , 2002 , 12.2
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

[1] Hajto, J., Owen, A. E., Snell, A. J., LeComber, P. G., and Rose, M. J., Amorphous and Crystalline Semiconductor Devices, edited by Kanicki, J., (Artech House, 1992), p. 641. See also references cited therein.Google Scholar
[2] Jafar, M. and Haneman, D., Phys. Rev. B 49, 13611 (1994)Google Scholar
[3] Gordon, K. and Wong, R., IEEE IEDM Tech. Dig., 27 (1993)Google Scholar
[4] Snell, A. J., LeComber, P. G., Hajto, J., Rose, M. J., Owen, A. E., and Osborne, I. S., J. Non-Cryst. Solids, 137&138, 1257 (1991)Google Scholar
[5] Mahan, A. H., Carapella, J., Nelson, B. P., Crandall, R. S., and Balberg, I., J. Appl. Phys., 69, 6728 (1991)Google Scholar
[6] Dawson, D. K. and Creamer, R. H., Brit. J. Appl. Phys. 16, 1643 (1965); C. Weaver and J. E. S. Macleod, Brit. J. Appl. Phys. 16, 441(1965)Google Scholar
[7] Barnett, A. M. and Milnes, A. G., J. Appl. Phys., 37, 4215(1966)Google Scholar