The materials under consideration are binary aluminium-copper alloys (10 at% to 90.3 at%Cu) produced by HF melting and RF magnetron sputtering. The resulting micro structures have been observed by standard metallographic techniques, X-ray powder diffraction, scanning electron microscopy and transmission electron microscopy. Vickers microhardness of bulk Al–Cu alloys reaches a maximum of 1800 MPa at 70.16 at%Cu. An unexpected metastable $\theta '$ phase has been observed within aluminium grain in Al-37 at%Cu.The mechanical properties of a family of homogeneous Al $_{1-x}$ Cux (0 < x < 0.92) thin films made by radiofrequency (13.56 MHz) cathodic magnetron sputtering from composite Al–Cu targets have been investigated. The as-deposited microstructures for all film compositions consisted of a mixture of the two expected face-centred-cubic (fcc) Al solid solution and tetragonal θ (Al2Cu) phases. The microhardness regularly increases and the grain size decreases both with copper concentration. This phenomenon of significant mechanical strengthening of aluminium by means of copper is essentially due to a combination between solid solution effects and grain size refinement.This paper reports some structural features of different Al–Cu alloys prepared by HF melting and RF magnetron on glass substrate sputtering.