Hostname: page-component-745bb68f8f-cphqk Total loading time: 0 Render date: 2025-02-10T12:37:40.707Z Has data issue: false hasContentIssue false
  • English
  • Français

XPS Analysis of Lithium Surface and Modification of Surface State for Uniform Deposition of Lithium

Published online by Cambridge University Press:  15 February 2011

K. Kanamura ,
S. Shiraishi  and
Z. Takehara
K. Kanamura
Affiliation:
Division of Energy and Hydrocarbon Chemistry, Graduate School of Engineering, Kyoto University, Yoshida-honmachi, Sakyo-ku, Kyoto 606-01, Japan
S. Shiraishi
Affiliation:
Division of Energy and Hydrocarbon Chemistry, Graduate School of Engineering, Kyoto University, Yoshida-honmachi, Sakyo-ku, Kyoto 606-01, Japan
Z. Takehara
Affiliation:
Division of Energy and Hydrocarbon Chemistry, Graduate School of Engineering, Kyoto University, Yoshida-honmachi, Sakyo-ku, Kyoto 606-01, Japan
Get access

Abstract

The surface modification of lithium deposited at various current densities in propylene carbonate containing 1.0 ml dm−3 LiCIO4 was performed by addition of various amount of HF into the electrolyte, in order to investigate the effect of the HF addition on the surface reaction of lithium. XPS and SEM analyses showed that the surface state of lithium was influenced by the concentration of HF and the electrodeposition current. These two parameters are related to the chemical reaction rate of the lithium surface with HF and the electrodeposition rate of lithium, respectively. The surface modification was highly effective in suppressing lithium dendrite formation when the chemical reaction rate with HF was greater than the electrochemical deposition rate of lithium.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 393: Symposium W – Materials for Electrochemical Energy Storage and Conversion , 1995 , 229
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Peled, E., J. Electrochem. Soc., 126 2047 (1979).Google Scholar
2 Rauch, R. D. and Brummer, S. B., Electrochim. Acta, 22, 75 (1977).Google Scholar
3 Tobishima, S., Arakawa, M., Hirai, H., and Yamaki, J., J. Power Sources, 26, 449 (1989).Google Scholar
4 Aurbach, D., Daroux, M. L., Faguy, P., and Yeager, E., J. Electrochem. Soc, 134, 1611 (1987).Google Scholar
5 Aurbach, D. and Chusid, O. (Youngman), J. Electrochem. Soc., 140, L1 (1993).Google Scholar
6 Aurbach, D., Ein-Ely, Y., and Zaban, A., J. Electrochem. Soc, 141, L1 (1994).Google Scholar
7 Zavadil, R. D. and Armstrong, N. R., J. Electrochem. Soc., 137, 2371 (1990).Google Scholar
8 Kanamura, K., Tamura, H., and Takehara, Z., J. Electroanal. Chem., 333, 127 (1992).Google Scholar
9 Thevenin, J. G. and Muller, R. H., J. Electrochem. Soc, 134,273 (1987).Google Scholar
10 Aurbach, D. and Zaban, A.. J. Electroanal. Chem., 348, 155 (1993).Google Scholar
11 Osaka, T., Monma, T., Nishimura, K., and Tajima, T., J. Electrochem. Soc., 140, 2745 (1993).Google Scholar
12 Kanamura, K., Shiraishi, S., and Takehara, Z., J. Electrochem. Soc, 141, L108 (1994).Google Scholar
13 Kanamura, K., Shiraishi, S., Tamura, H., and Takehara, Z., J. Electrochem. Soc., 141, 2379 (1994).Google Scholar
14 Kanamura, K., Tamura, H., Shiraishi, S., and Takehara, Z., J. Electrochem. Soc., 142, 340 (1995).Google Scholar