Hostname: page-component-745bb68f8f-s22k5 Total loading time: 0 Render date: 2025-02-10T08:16:36.241Z Has data issue: false hasContentIssue false
  • English
  • Français

Thin Film Photovoltaic Options – an Overview

Published online by Cambridge University Press:  25 February 2011

Jack L. Stone
Jack L. Stone*
Affiliation:
Solar Electric Research Division Solar Energy Research Institute 1617 Cole Boulevard Golden, Colorado 80401USA
Get access

Abstract

Significant deployment of the promising option of photovoltaics for energy will require cost-effective technologies that compete effectively with conventional sources. One such option utilizes thin films of a variety of photovoltaic materials. These thin films must be manufacturable in large quantities, and they must have high performance and acceptable reliability. Amorphous silicon (a-Si) was the first successfully demonstrated thin film to be widely adopted by industry. This material is already used to power a larger number of such consumer products as calculators, watches, and battery chargers. Recently, a-Si solar cells have been scaled up to large-area modules for power applications. Large fields of these modules have been deployed by utility companies for their evaluation. Polycrystalline thin films such as copper indium diselenide (CIS) and cadmium telluride (CdTe) have recently shown promise in following the path of a-Si. High-efficiency, large-area submodules have been successfully tested. By combining these materials in hybrid combinations, researchers have demonstrated much higher efficiencies. Even higher efficiencies have been demonstrated with more conventional materials such as silicon and gallium arsenide in thin-film form. Such devices have a high degree of acceptability because of their successful application for power uses in their non-thin-film form. Extensive examples are given to demonstrate the technical viability of these photovoltaic approaches for possible use in utility-scale power plants and in other near-term, highvalue markets.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 149: Symposium E – Amorphous Silicon Technology - 1989 , 1989 , 383
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Proceedings of the Twentieth IEEE Photovoltaic Specialists Conference 1988, Las Vegas, Nevada, September 26–30, 1988 (in Press).Google Scholar
[2] Proceedings of the Eighth E.C. Photovoltaic Solar Energy Conference, Florence, Italy, May 9–13, 1988, Kluwer Academic Publishers.Google Scholar
[3] Proceedings of the Fourth International Photovoltaic Science and Engineering Conference, Sydney, Australia, February 14–17, 989 (in Press).Google Scholar
[4] Sabisky, E.S. and Stone, J.L., Proceedings of the 20th IEEE Photovoltaic Specialists Conference, Las Vegas, 1988 (in Press).Google Scholar
[5] Carlson, D.E. and Wronski, C.R., Appl. Phys. Lett. 28, 671 (1976).Google Scholar
[6] Carlson, D.E., IEEE Trans. Elect. Dev. ED–24, 449 (1977).Google Scholar
[7] Mitchell, K., Eberspacher, C., Ermer, J., and Pier, D., Proceedings of the 20th IEEE Photovoltaic Specialists Conference, Las Vegas, 1988 (in Press).Google Scholar
[8] Stone, J.L., Proceedings of the 3rd International Photovoltaic Science and Engineering Conference, Tokyo, 161 (1987).Google Scholar
[9] Mickelsen, R.A. and Chen, W.S., Proceedings of the 16th IEEE Photovoltaic Specialists Conference, San Diego, 781 (1982).Google Scholar
[10] Barnett, A.W., Proceedings of the 4th International Photovoltaic Science and Engineering Conference, Sydney, 1989 (in Press).Google Scholar