Hostname: page-component-745bb68f8f-5r2nc Total loading time: 0 Render date: 2025-02-04T16:33:29.710Z Has data issue: false hasContentIssue false
  • English
  • Français

Surface Layer Crystallization of Simulated Waste Glass at Elevated Temperatures

Published online by Cambridge University Press:  25 February 2011

Tadashi Inoue ,
Hayaichi Yokoyama ,
Takeo Onchi  and
Hiroaki Kōyama
Tadashi Inoue
Affiliation:
Central Research Institute of Electric Power Industry, 11-1, Iwato Kita 2 Chome, Komae-Shi, Tokyo 201 Japan
Hayaichi Yokoyama
Affiliation:
Central Research Institute of Electric Power Industry, 11-1, Iwato Kita 2 Chome, Komae-Shi, Tokyo 201 Japan
Takeo Onchi
Affiliation:
Central Research Institute of Electric Power Industry, 11-1, Iwato Kita 2 Chome, Komae-Shi, Tokyo 201 Japan
Hiroaki Kōyama
Affiliation:
Central Research Institute of Electric Power Industry, 11-1, Iwato Kita 2 Chome, Komae-Shi, Tokyo 201 Japan
Get access

Abstract

Surface crystallization was investigated for alkali borosilicate glass containing simulated waste of 26.4 wt% in the temperature range of 550 to 800°C. The crystals deposited on the surface layer of glasses were mainly composed of molybdates and molybdenum oxide. The saturated crystalline fraction of eash deposit, except for KMOO4, was maximum at 800°C in the temperature range investigated, and decreasing with decreasing temperature. The fractional change of crystallization was evaluated with the JMA equation. The activation energy of surface crystallization was estimated to be in the range of 50 to 70 kcal/mol for most of molybdates.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 26: Symposium D – Scientific Basis for Nuclear Waste Management VII , 1983 , 535
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kawamoto, Y., Clemens, K. and Tomozawa, M., Phys. Chem. Glasses 22 [5] 110 (1981), and J. Am. Ceram. Soc. 64 [ 5 yy] 292 (1981).Google Scholar
2. Terai, R., Eguchi, K. and Yamanaka, H., Proc. Int. Symp. on Ceramics in Nuclear Waste Management, P.62, CONF-790420, Cincinnati, Ohio, April (1979).Google Scholar
3. Abe, Y., Yogyo-Kyokai-Shi 81 [11] 471 (1973).10.2109/jcersj1950.81.939_471CrossRefGoogle Scholar
4. Freiman, S. W. and Hench, L.L., J. Am. Ceram. Soc. 51 [7] 382 (1968)Google Scholar
4a and 52 [2] 111 (1969).Google Scholar
5. Tagusagawa, N. and Saito, H., Yogyo-Kyokai-Shi 79 [6] 189 (1971).10.2109/jcersj1950.79.910_189Google Scholar
6. Johnson, W. A. and Mehl, R.F., Trans. AIME, 135 416 (1939).Google Scholar
7. Avrami, M., J. Chem. Phys. 7 [12] 1103 (1939).Google Scholar