Hostname: page-component-745bb68f8f-hvd4g Total loading time: 0 Render date: 2025-02-10T12:16:01.714Z Has data issue: false hasContentIssue false
  • English
  • Français

Structure and Electrochemical Behavior of Plasma-Sprayed LSGM Electrolyte Films

Published online by Cambridge University Press:  11 February 2011

H. Zhang ,
X. Ma ,
J. Dai ,
S. Hui ,
J. Roth ,
T.D. Xiao  and
D.E. Reisner
H. Zhang
Affiliation:
US Nanocorp®, Inc, 74 Batterson Park Road, Farmington, CT 06032, U.S.A.
X. Ma
Affiliation:
Inframat® Corporation, 74 Batterson Park Road, Farmington, CT 06032, U.S.A.
J. Dai
Affiliation:
US Nanocorp®, Inc, 74 Batterson Park Road, Farmington, CT 06032, U.S.A.
S. Hui
Affiliation:
Inframat® Corporation, 74 Batterson Park Road, Farmington, CT 06032, U.S.A.
J. Roth
Affiliation:
US Nanocorp®, Inc, 74 Batterson Park Road, Farmington, CT 06032, U.S.A.
T.D. Xiao
Affiliation:
US Nanocorp®, Inc, 74 Batterson Park Road, Farmington, CT 06032, U.S.A.
D.E. Reisner
Affiliation:
US Nanocorp®, Inc, 74 Batterson Park Road, Farmington, CT 06032, U.S.A.
Get access

Abstract

An intermediate temperature solid oxide fuel cell (SOFC) electrolyte film of La0.8Sr 0.2Ga0.8Mg0.2O2.8 (LSGM) was fabricated using a plasma spray process. The microstructure and phase were investigated using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The electrochemical behavior of the thermal sprayed LSGM film was investigated using electrochemical impedance spectroscopy (EIS). The study indicates that thermal spray can deposit a dense LSGM layer. It was found that the rapid cooling in the thermal process led to an amorphous or poor crystalline LSGM deposited layer. This amorphous structure has a significant effect on the performance of the cell. Crystallization of the deposited LSGM layer was observed during annealing between 500–600 °C. After annealing at 800 °C, the ionic conductivity of the sprayed LSGM layer can reach the same level as that of the sintered LSGM.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 756: Symposia EE/FF – Solid-State Ionics – Materials for Fuel Cells and Fuel Processors , 2002 , FF4.5
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Nguyen, T. and Djurado, E, Solid State Ionics, 138, 191 (2001).Google Scholar
2. Tsai, T. and Barnett, S.A., J. Vac. Sci. Technol. A13, 1073 (1995).Google Scholar
3. Forthmann, R., Blass, G., and Buchkremer, H. P., Netherlands Soc. for Maters. Sci. (Netherlands), 271 (1997).Google Scholar
4. Murphy, M.M., Vanherle, J., McEvoy, A. J., Thampi, K.R.., J. Electrochem. Soc., 141, L94 (1994).Google Scholar
5. Minh, N. Q. and Takahashi, T., Science and Technology of Ceramic Fuell Cells, (Elsevier, 1995) pp. 71.Google Scholar