Hostname: page-component-745bb68f8f-s22k5 Total loading time: 0 Render date: 2025-02-05T15:40:58.765Z Has data issue: false hasContentIssue false
  • English
  • Français

Stress- and Electromigration-Induced Voiding and Its Correlation to Macroscopic Stress Changes

Published online by Cambridge University Press:  10 February 2011

Herbert Schroeder
Herbert Schroeder*
Affiliation:
Institut für Festkörperforschung, Forschungszentrum Jüich GmbH, D-52425 Jülich, Germany; e-mail: he.schroeder@fz-juelich.de
Get access

Abstract

This paper reviews experimental data on stress- and electromigration (EM)-induced voiding in passivated Al- and AlSiCu-lines under different experimental conditions (thermal cycling, iso-thermal annealing without and with EM-current). The data are deduced from measured changes of average metal strain or stress and from in-situ observations in a transmission electron microscope. There are excellent correlations between corresponding data sets showing stress induced voiding during cycling and isothermal annealing without EM-current, but nearly no changes in stresses or void volume during EM-testing. The implications of these results on EM-modelling are discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 516: Symposium E – Low Dielectric Constant Materials IV , January 1998 , 237
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Sanchez, J. E. and Reilly, C. J., this Symposium (K4.4);Google Scholar
Besser, P. R., Brown, D., Sanchez, J. E., and Reilly;, C. J. this Symposium (K5.7).Google Scholar
2. Burges, U., Eppler, I., Schilling, W., Schroeder, H., and Trinkaus, H., Proc. of Third Int. Workshop on “Stress-induced Phenomena in Metallization”, Stanford (USA), June 1995, AIP Conf. Proc. 373, 3(1996).Google Scholar
3. Eppler, I., Schroeder, H., Burges, U., and Schilling, W., Mat. Res. Soc. Conf. Proc. 436, 429(1997).10.1557/PROC-436-429Google Scholar
4. Eppler, I., Thesis, RWTH Aachen, 1998 and Reports of FZ-Jtilich, in press.Google Scholar
5. Blech, I. A. and Meieran, E. S., J Appl. Phys., 40, 485(1969).10.1063/1.1657425Google Scholar
6. Riege, S. P., Hunt, A. W., and Prybyla, J. A., Mat. Res. Soc. Conf. Proc. 391, 249(1995).10.1557/PROC-391-249Google Scholar
7. Heinen, D. and Schroeder, H., Mat. Res. Soc. Conf. Proc. 473, 381(1997).10.1557/PROC-473-381Google Scholar
8. Marieb, T. N. et al. , Proc. of Second Int. Workshop on “Stress-induced Phenomena in Metallization”, Austin (USA), 1993, AIP Conf. Proc. 305, 1(1994).Google Scholar
9. Lee, S., Bravman, J. C., Flinn, P. A., and Marieb, T. N., this Symposium (K4.8).Google Scholar
10. Burges, U., Thesis, RWTH Aachen and Reports of FZ-Jtilich, JIl-3112 (1995);Google Scholar
Hbnings, J., Diploma Thesis, RWTH Aachen, 1995;Google Scholar
Beckers, D., Thesis, RWTH Aachen and Reports of FZ-Jtilich, Jtil-3293 (1996);Google Scholar
Heinen, D., Thesis, RWTH Aachen and Reports of FZ-Jtilich, Jil-3435 (1997);Google Scholar
Chr. Roths, Thesis, RWTH Aachen, 1998 and Reports of FZ-Jtilich, in press.Google Scholar
11. Korhonen, M. A., Borgesen, P., Brown, D. D., Li, C.-Y., Sullivan, T. D. and Totta, P. A., Proc. of Second Int. Workshop on “Stress-induced Phenomena in Metallization”, Austin (USA), 1993, AIP Conf. Proc. 305, 15(1994).Google Scholar
12. Korhonen, M. A., Borgesen, P., Brown, D. D., and Li, C.-Y., Mat. Res. Soc. Conf. Proc. 309, 121(1993).10.1557/PROC-309-121Google Scholar
13. Gleixner, R. J. and Nix, W. D., Mat. Res. Soc. Conf. Proc. 436, 405(1997).10.1557/PROC-436-405Google Scholar
14. Schroeder, H. and Heinen, D., Proc. of Fourth Int. Workshop on “Stress-induced Phenomena in Metallization”, Tokyo (Japan) June 1997, AIP Conf. Proc. 418, 183(1998).Google Scholar
15. Roths, Ch., Hönings, J., Eppler, I., and Schroeder, H., Mat. Res. Soc. Conf. Proc. 473, 441(1997).10.1557/PROC-473-441Google Scholar
16. Schroeder, H. and Beckers, D., Proc. “Advanced Metallization and Interconnect Systems for ULSI Applications in 1996, Boston (USA), Mat. Res. Soc. Conf. Proc ULSI XII, p. 97 (1997).Google Scholar