Hostname: page-component-745bb68f8f-s22k5 Total loading time: 0 Render date: 2025-02-08T11:05:44.572Z Has data issue: false hasContentIssue false
  • English
  • Français

Simulation of Collimated Titanium Nitride Physical Vapor Deposition using EVOLVE

Published online by Cambridge University Press:  25 February 2011

Anthony J. Toprac ,
Shi-Qing Wang ,
Jim Schlueter  and
Timothy S. Cale
Anthony J. Toprac
Affiliation:
SEMATECH, 2706 Montopolis, Austin, TX 78741-6499
Shi-Qing Wang
Affiliation:
SEMATECH, 2706 Montopolis, Austin, TX 78741-6499 Also with Fairchild Research Center, NSC
Jim Schlueter
Affiliation:
SEMATECH, 2706 Montopolis, Austin, TX 78741-6499
Timothy S. Cale
Affiliation:
Arizona State University, Tempe, AZ 85287-6006
Get access

Abstract

Simulation of the physical vapor deposition (PVD) of titanium nitride (TiN) in micronscale contacts was performed using EVOLVE, a physically-based model of non-continuum mass transport. Simulations of uncollimated TiN PVD using a sub-unity sticking coefficient of 0.6 provide accurate model predictions of experimental data. Using this value in simulations of PVD with a 1:1 aspect ratio collimator results in a significant underprediction of titanium nitride deposition in the feature bottom in comparison to the experimental results. This under-prediction was compensated for empirically by adjusting a “beaming” coefficient to produce good model predictions of the experimental data.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 337: Symposium B – Advanced Metallization for Devices and Circuits—Science, Technology and Manufacturing III , 1994 , 547
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Cale, T.S.. Flux distributions in low pressure deposition and etch models. J. Vac. Sci. Technol. B, 9(5):2551, 1991.Google Scholar
2 Cale, T.S., Gandy, T.H., and Raupp, G.B.. A fundamental feature scale model for low pressure deposition processes. J. Vac. Sci. Technol. A, 9(3):524, 1991.Google Scholar
3 Cale, T.S. and Raupp, G.B.. A unified line-of-sight model of deposition in rectangular trenches. J. Vac. Sci. Technol. B, 8(6): 1242, 1990.Google Scholar
4 Joshi, R.V. and Brodsky, S., in Proceedings of the Ninth International VLSI Multilevel Interconnection Conference (VMIC), Santa Clara, CA, 1992, page 253.Google Scholar
5 Rogers, B.R., in Cale, T.S. and Pintchovski, F.S., editors, Advanced Metallization for ULSI Applications 1992, volume V8, Mat. Res. Soc., Pittsburgh, PA, 1993, pages 341–344.Google Scholar
6 Rogers, B.R. and Cale, T.S.. Spatial composition variation in sputtered ti-w films. Thin Solid Films, 236:334–340, 1993.CrossRefGoogle Scholar