Hostname: page-component-54dcc4c588-2ptsp Total loading time: 0 Render date: 2025-09-12T17:11:57.087Z Has data issue: false hasContentIssue false
  • English
  • Français

The Role of Si-H Functionality in Oxycarbide Glass Synthesis

Published online by Cambridge University Press:  25 February 2011

Anant K. Singh  and
Carlo G. Pantano
Anant K. Singh
Affiliation:
Department of Materials Science and Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802
Carlo G. Pantano
Affiliation:
Department of Materials Science and Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802
Get access

Abstract

Silicon oxycarbide gels and glasses were synthesized using various ratios of methyldimethoxysilane and TEOS. These gels and glasses were compared with those made from methyltrimethoxysilane and TEOS. The effect of the Si-H functionality in the methyldimethoxysilane was of primary interest. Hydrolysis and condensation processes were monitored using 1H and 29Si-NMR spectroscopy. The structures and the oxycarbide fractions of the glasses, obtained after heating the gels to 900°C in flowing argon, were investigated with 29si-MAS NMR. The total carbon and silicon contents of the glasses were determined using chemical analysis. The glasses covered the range of carbon concentration from ∼1 to 15%, while the silicon concentrations were constant at about 40%. The concentration of the oxycarbide species was enhanced in the glasses synthesized with the Si-H functionality in the precursor.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 271: Symposium N – Better Ceramics Through Chemistry V , 1992 , 795
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Renlund, G. M., “Silicon Oxycarbide Glasses”, PhD thesis, Rensselaer Polytechnic Institute, Dec. 1989.Google Scholar
2. Zhang, H. and Pantano, C. G., J. Amer. Ceram. Soc, 73, (4), 958 (1990).Google Scholar
3. Babonneau, F., Thorne, K. and Mackenzie, J. D., Chem. Mater., 1, 554 (1989).CrossRefGoogle Scholar
4. Homeny, J., Nelson, G. G. and Risbud, S. H., J. Amer. Ceram. Soc, 71 (5), 386 (1988).Google Scholar
5. Chi, F. K., Ceram. Eng. Sci. Proc, 4, 704 (1983).CrossRefGoogle Scholar
6. Chen, K. C., Thorne, K. J., Chemseddine, A., Babonneau, F. and Mackenzie, J. D. in Better Ceramics Through Chemistry III, edited by Brinker, C. J., Clark, D. E. and Ulrich, D. R. (Mater. Res. Soc Proc 121, Pittsburgh, PA 1988) pp. 571–574.Google Scholar
7. Belot, V., Corriu, R. J. P., Leclercq, D., Mutin, P. H. and Vioux, A., to be publishedGoogle Scholar
8. Thorne, K., Liimatta, E. and Mackenzie, J. D., J. Mater. Res., 6 (10), 2199 (1991).CrossRefGoogle Scholar
9. Yajima, S., Hasegawa, Y., Hayashi, J. and Iimura, M., J. Mat. Sci. 13, 2569 (1983).Google Scholar
10. Lipowitz, J., Freeman, H. A., Chen, R. T. and Prack, E. R., Advanced Ceramic Materials, 2 (2), 121(1987).Google Scholar