Hostname: page-component-6587cd75c8-ptrpl Total loading time: 0 Render date: 2025-04-23T21:26:41.783Z Has data issue: false hasContentIssue false
  • English
  • Français

The Role of Glassy Grain Boundary Phases in the Microwave Joining of Alumina

Published online by Cambridge University Press:  15 February 2011

Pamela Davis ,
Jon Binner ,
Tom Cross  and
John Fernie
Pamela Davis
Affiliation:
Department of Materials Engineering and Materials Design
Jon Binner
Affiliation:
Department of Materials Engineering and Materials Design
Tom Cross
Affiliation:
Department of Electrical and Electronic Engineering, The University of Nottingham, University Park, Nottingham, UK
John Fernie
Affiliation:
TWI, Abington Hall, Abington, Cambridge, UK
Get access

Abstract

The role of intergranular glassy phases in the microwave joining of alumina ceramic rods has been investigated. Alumina ceramics of different purities have been examined using a TE102 single mode rectangular resonant cavity operating at 2.45 GHz. Temperature and axial pressure were varied and the resultant join microstructures analyzed. The presence of a glassy grain boundary phase has been shown to improve the ability to microwave join alumina ceramics by increasing the dielectric loss of the ceramic and, when softened, by enabling the alumina grains to flow under the imposed load. Evidence has also been found for the sintering of individual grains where they have come into contact across the join line.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 347: Symposium O – Microwave Processing of Materials IV , 1994 , 655
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Fukushima, H., Yamanaka, T. and Matsui, M., J. Mater. Res., 5, 397 (1990).Google Scholar
2. Palaith, D., Silberglitt, R., Wu, C.C.M., Kleiner, R. and Libelo, E.L., in Microwave Processing of Materials, edited by Sutton, W.H., Brooks, M.H. and Chabinsky, I.J. (Mater. Res. Soc. Proc. 124, Pittsburgh, PA, 1988) pp. 255–266.Google Scholar
3. Arai, M., Binner, J.G.P., Carr, G.E. and Cross, T.E., in Microwaves: Theory and Application in Materials Processing II. edited by Clark, D.E., Tinga, W.R. and Laia, J.R. Jr (Ceram. Trans. 36, Am. Ceram. Soc., Westerville, OH, 1993) pp. 483–492.Google Scholar
4. Nelson, S.O. and You, T-S., J. Phys. D: Appl. Phys., 23, 346 (1990).Google Scholar
5. Bruce, R.W., in Microwaves: Theory and Application in Materials Processing, edited by Clark, D.E., Gac, F.D. and Sutton, W.H.. (Ceram. Trans. 21, Am. Ceram. Soc., Westerville, OH, 1993) pp. 107–116.Google Scholar
6. Ho, W.W. and Morgan, P.E.D., Comm. Am. Ceram. Soc., 70, [9], C209–C210 (1987).Google Scholar