Hostname: page-component-745bb68f8f-mzp66 Total loading time: 0 Render date: 2025-02-10T12:24:14.226Z Has data issue: false hasContentIssue false
  • English
  • Français

Reliable Electrokinetic Characterization Procedures For Ceramic Powders

Published online by Cambridge University Press:  28 February 2011

Jiun-Fang Wang ,
Richard E. Riman  and
Daniel J. Shanefield
Jiun-Fang Wang
Affiliation:
Rutgers University, Department Of Ceramics, P.O. Box 909, Piscataway, Nj 08855–0909
Richard E. Riman
Affiliation:
Rutgers University, Department Of Ceramics, P.O. Box 909, Piscataway, Nj 08855–0909
Daniel J. Shanefield
Affiliation:
Rutgers University, Department Of Ceramics, P.O. Box 909, Piscataway, Nj 08855–0909
Get access

Abstract

Microelectrophoresis Is An Important method for measuring surface properties of colloidal materials. In order to obtain reliable measurements, a good reference colloid must be chosen first, and both the behavior of the reference under a variety of measurement conditions and instrumental factors must be established. Polystyrene latex has proven to be a good reference material. Time-dependent, solids-loading, and electrolyte concentration effects are determined below in order to establish reproducible referencing conditions. Using these referencing conditions, surface properties of silicon nitride as a function of aging time and atmosphere are studied.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 180: Symposium A – Better Ceramics Through Chemistry IV , 1990 , 293
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Reed, James S., Introduction to the Principles of Ceramic Processing, (John Wiley & Sons, Inc., New York, 1988), p. 141.Google Scholar
2. Parks, G. A., Adv. Chem. Ser. 67, 121–160 (1967).Google Scholar
3. Parks, G. A., Chem. Rev. 65, 177–198 (1965).Google Scholar
4. Bergstrom, L. and Pugh, R. J., J. Am. Ceram. Soc. 72 (1), 103–109 (1989);Google Scholar
4a. Whitman, P. K. and Feke, D. L., ibid., 71 (12), 1086–1093 (1988).Google Scholar
5. Ottewill, R. H. and Shaw, J. N., J. Electroanal. Chem. 37, 133–142 (1972).Google Scholar
6. Corry, W. D. and Seaman, G. V. F., J. Colloid Interface Sci. 63 (1), 136–150 (1978);Google Scholar
6a. Corry, W. D., ibid., 63 (1), 151–160 (1978);Google Scholar
6b. Tamai, H., Niino, K., and Suzawa, T., ibid., 131 (1), 1–7 (1989).Google Scholar
7. Marlow, B. J., Fairhurst, D., and Schutt, W., Langmuir 4, 776–780 (1988).Google Scholar
8. Hiemenz, Paul C., Principles of Colloid and Surface Chemistry, 2nd ed. (Marcel Dekker Inc., New York, 1986), p. 737.Google Scholar
9. Siffert, B. and Fimbel, P., Colloids and Surfaces 11, 377–389 (1984).Google Scholar
10. Anderson, J. L., J. Colloid Interface Sci. 82 (1), 248–250 (1981).Google Scholar