Published online by Cambridge University Press: 01 February 2011
While a-Si:H based elevated photodiode arrays hold the promise of superior performance and lower cost CMOS-based image sensors relative to those based upon crystalline silicon photodiodes, the one area where a-Si:H based sensor performance has not been as good is in image lag. This problem is only exacerbated by Staebler Wronski Effect induced junction degradation. Image lag is caused by residual charge from photocurrents trapped within the junction once the light source is removed and can be measured for several seconds, even under continuous applied reverse bias. It is seen both in constant and variable bias pixel architectures. However, by carefully controlling a-Si:H junction bias conditions, it is possible to significantly reduce these transient photocurrents. This article will describe how the photocurrent decay time exponent can be reduce by almost an order of magnitude. Finally the physical causes behind image lag in a-Si:H based photodiode arrays will be discussed.
To send this article to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about sending to your Kindle. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save this article to your Dropbox account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Dropbox account. Find out more about saving content to Dropbox.
To save this article to your Google Drive account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Google Drive account. Find out more about saving content to Google Drive.