Hostname: page-component-745bb68f8f-5r2nc Total loading time: 0 Render date: 2025-01-27T13:45:53.667Z Has data issue: false hasContentIssue false
  • English
  • Français

Rapid-Solidified Metallic Actuator Materials Developed by Electromagnetic Nozzleless Melt Spinning Method

Published online by Cambridge University Press:  15 February 2011

Y. Furuya
Y. Furuya*
Affiliation:
Department of Intelligent Machines and System Engineering, Hirosaki University, IHirosaki 036-8152, Japan, fumya@cc.hirosaki-u.ac.jp
Get access

Abstract

Electro-magnetic nozzleless melt-spinning method was developed by combining the control of the flow down of the molten metals after electromagnetic float-melting(i.e. levitation) with rapid solidification by rotating roll. The metallurgical grain microstructures can be changed by rotating roll speed. It was confinned that the produced, intermetallic TiNi and NiAl system alloy thin plates showed the strong crystal anisotropy, higher shape memory functional properties than those of the conventionally processed melt-worked samples having its same origin. As new SMAs by using this method, ferromagnetic shape memory, FePd alloy having very large magnetostriction and super high temperature shape memory, RuTa alloy having the transformation over 1000°C were developed. Moreover, our recent study on the advanced rapid-solidification machine to produce many kinds of short fibers as well as ribbons is introduced. Finally, harmonic material design for sensor/actuator stacking composite system, namely “Smart Board” for aircraft structures will be introduced.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 604: Symposium LL – Materials for Smart Systems III , 1999 , 109
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

References:

(1) Smart composites and adaptive structures; JSME Publication edited by Tani, (1997) (Youken-do, Tokyo)Google Scholar
(3) Sater, J.: EF Conf. for Adaptive Composite (Banffs, 1997, July) and N.Hagood(AMSL/MIT) (Introduction of AMSL/MIT, Nov. 1997)Google Scholar
(4) Furuya, Y : Proceedings of Ist Japan-France Intelligent Materials and Structures Seminar, (Sendai, Japan), 113(1997).Google Scholar
(5) Ullakko, K., Huang, J. K., Kororin, V V and O'Handley, R. : Scripta Materialia, 36, 10, 1133 (1997).10.1016/S1359-6462(96)00483-6Google Scholar
(6) Vasilev, A., Bozhko, A., Khovalia, V., Takagi, T., Tani, J., Matsumoto, M. and Suzuki, S.; Int.Symp.Non-linear Electromagnetic Systems(ISEM'97)ppWPAIGoogle Scholar
(7) Furuya, Y Hagood, N., Kimura, H.M. and Watanabe, T.: J.Appl.Magn.Society,Japan,23,1-1(1999) to be printed.10.3379/jmsjmag.23.400Google Scholar
(8) Watanabe, T.: Res Mechanica, 11,47 (1984).5 Google Scholar
(9) Wuttig, M.: private communication(Oct.,1999)Google Scholar