Hostname: page-component-745bb68f8f-mzp66 Total loading time: 0 Render date: 2025-01-27T14:07:05.817Z Has data issue: false hasContentIssue false
  • English
  • Français

The Production of Porous Si3N4 Ceramics with 100% β Phase

Published online by Cambridge University Press:  15 February 2011

Naruki Saito ,
K. Ishizaki  and
A. Kuzjukevics
Naruki Saito
Affiliation:
Nagaoka University of Technology, Department of Mechanical Engineering, Nagaoka, 940-21 Japan
K. Ishizaki
Affiliation:
Nagaoka University of Technology, Department of Mechanical Engineering, Nagaoka, 940-21 Japan
A. Kuzjukevics
Affiliation:
Institute of Inorganic Chemistry of the Latvian Academy of Sciences, Salaspils, Latvia
Get access

Abstract

Porous silicon nitride ceramics with open porosity fraction of about 0.25 were obtained by capsule-free hot isostatic pressing from as-received and aqueous Soxlet washed powders. Particle surface modification by aqueous washing increases green density of cold isostatically pressed bodies and leads to a decrease in open pore fraction. At the same time, the α–β transition rate of the treated powder decreases.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 251: Symposium S – Pressure Effects on Materials Processing and Design , 1991 , 149
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ishizaki, K., Takata, A. and Okada, S., J. Ceram. Soc. Jpn, Int. Edition 98, 15(1990).Google Scholar
2. Kawamoto, M., Eng, D.. Thesis, Nagaoka University of Technology, Japan (1991).Google Scholar
3. Kawamoto, M., Ishizaki, C. and Ishizaki, K., J. Mater. Sci. Letters, 10, 279(1991).Google Scholar
4. Gazzar, C.P. and Messier, D.R., Ceram. Bull. 56, 777(1977).Google Scholar
5. Hamasaki, T. and Ishizaki, K., J. Ceram. Soc. Jpn. 98, 995(1990).Google Scholar
6. Ashby, M.F., Proc. Intern. Conf. on Hot Isostatic Pressing, Lulcå, June 15–17, p.29 (1987).Google Scholar