Hostname: page-component-745bb68f8f-grxwn Total loading time: 0 Render date: 2025-02-09T21:05:56.330Z Has data issue: false hasContentIssue false
  • English
  • Français

The Preparation of TEM Specimens from Hazardous or Difficult Materials

Published online by Cambridge University Press:  21 February 2011

Philip S. Sklad
Philip S. Sklad*
Affiliation:
Metals and Ceramics DivisionOak Ridge National LaboratoryP. O. Box XOak Ridge, TN 37831-6376
Get access

Abstract

The first, and often the most critical, step in any electron microscopy investigation is the preparation of an electron transparent specimen which is representative of the bulk material and in which the features of interest can be clearly observed and interpreted. However, for many materials of technological importance, specimen preparation procedures are far from routine. The application of standard, established techniques may be limited by material inhomogeneities, by physical constraints such as size or geometry, or by material constraints such as toxicity, radioactivity, or reactivity. Examples illustrating techniques for overcoming some of these difficulties will be reviewed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 115: Symposium W – Specimen Preparation for Transmission Electron Microscopy of Materials I , 1987 , 39
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Proceedings of the 43rd Annual Meeting of the Electron Microscopy Society of America, edited by Bailey, G. W. (San Francisco Press, San Francisco, 1984), pp. 166–186.Google Scholar
2. See for example Journal of Electron Microscopy Technique.Google Scholar
3. Goodhew, P. J., Thin Foil Preparation For Electron Microscopy, Edited by Glauert, Audrey M. (Elsevier Science Publishers B. V., Amsterdam, 1985).Google Scholar
4. Haltom, C. P., Proceedings of the 43rd Annual Meeting of the Electron Microscopy Society of America, edited by G. W. Bailey (San Francisco Press, San Francisco, 1985) p. 180.Google Scholar
5. Horton, L. L., a tutorial presented at the 43rd Annual Meeting of the Electron Microscopy Society of America, Louisville, KY, August 1985.Google Scholar
6. Fisher, A. T. and Angelini, P., Proceedings of the 43rd Annual Meeting of the Electron Microscopy Society of America, edited by G. W. Bailey (San Francisco Press, San Francisco, 1985) p. 182.Google Scholar
7. Rowcliffe, A. F., Diamond, S., Bleiberg, M. L., Spitznagel, J., and Choyke, J., Properties of Reactor Structural Alloys after Neutron or Particle Irradiations. ASTM STP 570, (Amer. Soc. for Test. and Mater., Philadelphia, 1975) p. 565.Google Scholar
8. Thomas, L. E. and Lentz, S., Proceedings of the 32nd Annual Meeting of the Electron Microscopy Society of America, edited by C. J. Arceneaux (Claitors, Baton Rouge, 1974) p. 362.Google Scholar
9. Evans, J. H., Rad. Effects, 8, 115–120 (1971).Google Scholar
10. Russell, K. F. and Horton, L. L., Proceedings of the 43rd Annual Meeting of the Electron Microscopy Society of America, edited by G. W. Bailey (San Francisco Press, San Francisco, 1985) pp. 170–171.Google Scholar
11. Sprague, J. A., Rev. Sci. Instrum., 46 (9), 1171–1173 (1975).CrossRefGoogle Scholar
12. Lee, E. H. and Rowcliffe, A. F., Microstructural Sci., 7, 403 (1979).Google Scholar
13. Alexander, K. B. and Stobbs, W. M., to be published.Google Scholar
14. Newcomb, S. B., Boothroyd, C. B. and Stobbs, W. M., J. Microsc. 140, Pt2, 195–207 (1985).CrossRefGoogle Scholar
15. King, W. E., Peterson, N. L., and Reddy, J. F., “Application of Transverse Section Analytical Electron Microscopy to the Study of Oxidation of Metal Alloys,” presented at the 9th Int. Congress on Metallic Corrosion, Toronto, Canada, June 3–7, 1984.Google Scholar
16. Hobbs, L. W. and Mitchell, T. E., Proc. of the High Temperature Corrosion Symposium, edited by Rapp, Robert A., (Nat. Assoc. of Corrosion Engineers, 1983) pp. 76–83.Google Scholar
17. Santella, M. L., Fisher, A. T., and Haltom, C. P., Accepted for publication in J. Electron Microsc. Tech., 1987.Google Scholar
18. Carter, C. H., Davis, R. F., and Nutt, S. R., J. Mater. Res., 1 (6), 811–819 (1986).Google Scholar
19. Liaw, H. P. and Davis, R. F., J. Electrochem. Soc., 132, 642 (1985).Google Scholar
20. Bravman, J. C. and Sinclair, R., J. Electron Micros. Tech., 1, 53–61 (1984).Google Scholar
21. Special Symposium on Replicas, Analytical Electron Microscopy-1984, edited by Williams, D. B. and Joy, D. C., (San Francisco Press, San Francisco, 1984) pp. 213–256.Google Scholar
22. Kenik, E. A. and Maziasz, P. J., Analytical Electron Microscopy-1984, edited by Williams, D. B. and Joy, D. C., (San Francisco Press, San Francisco, 1984), p. 231.Google Scholar
23. Bentley, James, Miller, M. K., Brenner, S. S., and Spitznagel, J. A., Proceedings of the 43rd Annual Meeting of the Electron Microscopy Society of America, edited by G. W. Bailey (San Francisco Press, San Francisco, 1985) p. 328.CrossRefGoogle Scholar
24. Zinkle, S. J. and Sindelar, R. L., Nucl. Instr. and Meth. in Phys. Res., B16, 154–162 (1986).Google Scholar
25. Angelini, P., Lehman, G. L., and Brynestad, J., Proceedings of the 41st Annual Meeting of the Electron Microscopy Society of America, edited by G. W. Bailey (San Francisco Press, San Francisco, 1983) p. 64.Google Scholar