Hostname: page-component-745bb68f8f-kw2vx Total loading time: 0 Render date: 2025-02-10T21:26:30.448Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation of High Tc Oxide Superconducting Tape by Rf Magnetron Sputtering

Published online by Cambridge University Press:  28 February 2011

M. Fukutomi ,
Y. Tanaka ,
T. Asano ,
H. Maeda  and
H. Takahara
M. Fukutomi
Affiliation:
National Research Institute for Metals. Tsukuba Laboratories, Tsukubashi, Ibaraki, Japan
Y. Tanaka
Affiliation:
National Research Institute for Metals. Tsukuba Laboratories, Tsukubashi, Ibaraki, Japan
T. Asano
Affiliation:
National Research Institute for Metals. Tsukuba Laboratories, Tsukubashi, Ibaraki, Japan
H. Maeda
Affiliation:
National Research Institute for Metals. Tsukuba Laboratories, Tsukubashi, Ibaraki, Japan
H. Takahara
Affiliation:
Mitsui Mining & Smelting Co., LTD., Central Research Laboratory, Ageo-shi Sai tama, Japan
Get access

Abstract

The feasibility of preparing YBaCuO films on metallic substrates is discussed in an attempt to fabricate a superconducting tape. Deposition method employed was an rf magnetron sputtering. An amorphous MgO thin layer was found to be a promising buffer layer. The highest zero resistance temperature was 84.0 K in its as grown state, and a critical current density was 4.8x10 A/cm2 at zero field and 77.4 K. Preliminary experiments using laser ablation technique were also carried out to obtain YBaCuO films at a rather high deposition rate.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 169: Symposium M – High Temperature Superconductors: Fundamental Properties and Novel Materials Processing , 1989 , 1197
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Fukutomi, M., Machida, J., Tanaka, Y., Asano, T., Wada, H., and Maeda, H.. MRS Int'l.Mtg. on Adv.Mats. 6, 863 (1989)Google Scholar
2 Fukutomi, M.,Akutsu, N.,Tanaka, Y.,Asano, Y.,and Maeda, H.,Cryogenic Eng. 24,98 (1989) (in Japanese)Google Scholar
3 Fukutomi, M.,Tanaka, Y.,Asano, T.,Maeda, H.,Akutsu, N.,Hoshino, K.,and Takahara, H., Int'l Sympo. on superconductivity,Tsukuba,Japan (1989) (submitted)Google Scholar
4 Sandstrom, R.L.,Gallagher, W.J.,Dinger, T.R.,Koch, R.H.,Laibowitz, R.B.,Kleinsasser, A.W.,Gambino, R.J.,Bumble, B.,and Chisholm, M.F..Appl. Phys.Lett. 53,444(1988)Google Scholar
5 Terada, N., Ihara, H., Jo, M., Hirabayashi, M., Kimura, Y., Matsutani, K., Hirata, K., Ohno, E., Sugise, R.. and Kawashima, F.. Jpn.J.Appl.Phys. 27, L639(1988)Google Scholar
6 Akutsu, N., Fukutomi, M., Katoh, K., Takahara, H., Tanaka, Y., Asano, T.,and Maeda, H., Int'l. Symp. on Superconductivity,Tsukuba,Japan (1989) (submitted)Google Scholar
7 Komuro, S., Aoyagi, Y., Morikawa, T.,and Namba, S., Jpn.J.Appl.Phys. 27,L34(1988)Google Scholar