Hostname: page-component-745bb68f8f-v2bm5 Total loading time: 0 Render date: 2025-02-10T12:49:04.491Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation and Microstructural Characterization of Ferroelectric Thin Film PbTiO3 on Si, MgO, and Sapphire Deposited by DC Reactive Multitarget Co-Sputtering.

Published online by Cambridge University Press:  25 February 2011

K.Y. Kim ,
H.I. Hwang ,
J.Y. Lee  and
W.K. Choo
K.Y. Kim
Affiliation:
Korea Advanced Institute of Science and Technology, Department of Materials Science and Engineering, Seoul, Korea
H.I. Hwang
Affiliation:
Korea Advanced Institute of Science and Technology, Department of Materials Science and Engineering, Seoul, Korea
J.Y. Lee
Affiliation:
Korea Advanced Institute of Science and Technology, Department of Materials Science and Engineering, Seoul, Korea
W.K. Choo
Affiliation:
Korea Advanced Institute of Science and Technology, Department of Materials Science and Engineering, Seoul, Korea
Get access

Abstract

PbTiO3 thin films on Si (100) plane were prepared by the DC reactive multitarget cosputtering technique. The film composition and structure were examined as a function of deposition parameters. The crystal structure and microstructure of PbTiO3 thin film deposited on Si at low substrate temperature of 200°C were examined as a fuction of post-annealing temperature by X-ray diffraction and transmission electron microscopy.The ferroelectric domain configurations were analyzed by plane-view TEM. The preferred orientation of PbTiO3 thin films deposited on MgO (100) and sapphire (1102) at high substrate temperature of 520°C were also examined.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 243: Symposium G – Ferroelectric Thin Films II , 1991 , 197
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Wu, Shu-Yau, IEEE Trans. Electron Devices, Aug. 1974, P.499 Google Scholar
2. Sreenivas, K., Sayer, M, Baar, D.J. and Nishioka, M., Appl. Phys. Lett., 52 (1988) 709.Google Scholar
3. lijima, K., Tomita, Y., Takayama, R and Wasa, K.. J. Appl. Phys. 60 (1986) 361 Google Scholar
4. Adachi, H., Mitsuyu, T., Yamazaki, O. and Wasa, K., J. Appl. Phys. 60 (1986) 736 Google Scholar
5. Adachi, H., Mitsuyu, T., Yanazaki, O. and Wasa, K., Jpn. J. Appl. Phys. suppl. 24–3, 13 (1985)Google Scholar
6. , Dingquan et al, Appl. Phys. Lett. 58(1), 7 January 1991. P.36.Google Scholar
7. Sreenvas, K., Rao, T. Sudersena, Munsingh, A., and Chandra, S., J. Appl. Phys. 57, 384 (1985)Google Scholar
8. Cullity, B.D., Elements of X-ray Diffraction, London: Addison-Wesley Publishing Co, Inc. 1978 PP. 284–292.Google Scholar
9. Lucuta, P.G, Teodoresu, V. and Vasiliu, F.. Appl phys. A37, 237 (1985)Google Scholar
10. Lucuta, P.G, J. Am. Ceram. Soc, 72, 933 (1989)Google Scholar
11. Gov, E.K.W., Mishra, R.K. and Thomas, G., J. Appl. Phys. 52, 2940 (1981)Google Scholar
12. Gerson, R., J. Appl. Phys. 31, 188 (1960)Google Scholar
13. Kushida, Keiko and Takeuchi, Hiroschi, Japanese Jounal of Appl. Phys. vol. 24 (1985) suppl. 24-2, PP.407–409 Google Scholar