Hostname: page-component-54dcc4c588-scsgl Total loading time: 0 Render date: 2025-09-12T02:09:33.737Z Has data issue: false hasContentIssue false
  • English
  • Français

Plasticity Enhancement of MoSi2 at Elevated Temperatures Through the Addition of TiC

Published online by Cambridge University Press:  15 February 2011

H. Chang ,
H. Kung  and
R. Gibala
H. Chang
Affiliation:
Department of Materials Science and Engineering University of Michigan, Ann Arbor, MI 48109
H. Kung
Affiliation:
Department of Materials Science and Engineering University of Michigan, Ann Arbor, MI 48109
R. Gibala
Affiliation:
Department of Materials Science and Engineering University of Michigan, Ann Arbor, MI 48109
Get access

Abstract

Monolithic MoSi2 and MoSi2-TiC particulate composites with 10 vol % and 15 vol % TiC were tested in compression between 950°C and 1200°C. The MoSi2-TiC composites can be deformed plastically at lower temperatures than MoSi2 can before brittle fracture occurs. The composites exhibit much lower strain hardening rates and attain zero strain hardening rate at much lower strains than monolithic MoSi2. The differences between the composites and monolithic MoSi2 in plasticity and in strain hardening behavior is attributed to efficient dislocation generation into the matrix from sources at the MoSi2-TiC interfaces.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 273: Symposium Q – Intermetallic Matrix Composites II , 1992 , 253
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Aikin, R. Jr., Scripta Metall. et Mater., 26 (7), 1025 (1992).Google Scholar
2. Umakoshi, Y., Sakagami, T., Hirano, T., and Yamane, T., Acta Metall., 38 (6), 909 (1990).CrossRefGoogle Scholar
3. Hollox, G. and Smallman, R., J. Appl. Phys., 37 (2), 818 (1966).CrossRefGoogle Scholar
4. Miracle, D. and Lipsitt, H., J. Am. Ceram. Soc., 66 (8), 592 (1983).Google Scholar
5. Meschter, P. and Schwartz, D., J. of Metals, 41 (11), 52 (1989).Google Scholar
6. Yang, J. and Jeng, S., J. Mater. Res., 6 (3), 505 (1991).CrossRefGoogle Scholar
7. Smithells Metals Reference Book, 6th ed. (Butterworths Publishers, London, 1983), p. 27–10.Google Scholar
8. Basu, A. and Ghosh, A., in Proceedings. International Symposium on Advanced Metal Matrix Composites for Elevated Temperatures, edited by Gungor, M., Lavernia, E., and Fishman, S. (ASM International, Materials Park, OH, 1991), p. 1.Google Scholar
9. Unal, O., Petrovic, J., Carter, D., and Mitchell, T., J. Amer. Ceram. Soc., 73 (6), 1752 (1990).Google Scholar