Hostname: page-component-745bb68f8f-mzp66 Total loading time: 0 Render date: 2025-01-12T10:57:52.406Z Has data issue: false hasContentIssue false
  • English
  • Français

Peak/Plateau Strength in Nanoscale Multilayer Thin Films: Constrained vs Unconstrained Dislocation Nucleation

Published online by Cambridge University Press:  31 January 2011

Qizhen Li  and
Peter M. Anderson
Qizhen Li
Affiliation:
qizhenl@unr.edu, University of Nevada, Reno, Chemical and Metallurgical Engineering, Reno, Nevada, United States
Peter M. Anderson
Affiliation:
anderson.1@osu.edu, The Ohio State University, Materials Science and Engineering, Columbus, Ohio, United States
Get access

Abstract

The peak/plateau strength of multilayer thin films is analyzed in terms of the stress to bow out a dislocation loop from an interface. Comparison of approximate analytic models to experimental data suggests that the bow out is “constrained” by nearby interfaces, at least for e-NbN/Mo and e-Ni/Cu films. Estimates of the interfacial pinning distance to form the bow out are ˜20b for e-NbN/Mo and ˜70b for e-Ni/Cu around peak/plateau strength (b is the magnitude of Burgers vector).

Keywords

nanoscalestrengththin film
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1177: Symposium Z – Computational Nanoscience–How to Exploit Synergy between Predictive Simulations and Experiment , 2009 , 1177-Z09-34
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Hall, E.O., Proc. Phys. Soc. B, 64 (1952) 747.Google Scholar
[2] Petch, N.J., J. Iron Steel Inst., 174(1953) 25.Google Scholar
[3] Huang, H.B. and Spaepen, F., Acta Materialia, 48(2000) 3261.Google Scholar
[4] Huang, H.B., Yu, Y.W., Verdier, M., Spaepen, F., Int. J. Fracture, 119/120(2003) 359.Google Scholar
[5] Haque, M.A. and Saif, M.T.A, Scripta Materialia, 47(2002) 863.Google Scholar
[6] Madan, A., Wang, Y.Y., Barnett, S.A., et al., J. Appl. Physics, 84(1998) 776.Google Scholar
[7] Shinn, M. and Barnett, S.A., Applied Physics Letters, 61(1994) p64.Google Scholar
[8] Misra, A., Verdier, M., Lu, Y.C., et al., Scripta Materialia, 39(1998) 555.Google Scholar
[9] Clemens, B.M., Kung, H., and Barnett, S.A., MRS Bulletin, 24(1999) 20.Google Scholar
[10] Anderson, P.M., Foecke, T., and Hazzledine, P.M., MRS Bulletin, 24(1999) 27.Google Scholar
[11] Li, Q. and Anderson, P.M., Mater Res Soc Symp Proc, (2004).Google Scholar
[12] Misra, A. and Kung, H., Advanced Engineering Materials, 3(2001) 217.Google Scholar
[13] Lamm, A.V. and Anderson, P.M., Scripta Materialia, 50(2004) 757.Google Scholar
[14] Anderson, P.M. and Li, Q., Modeling the performance of engineering structural materials III, ed. TS, Srivatsan, DR, Lesuer, EM, Taleff, Warrendale, PA (USA), TMS (2002) 237.Google Scholar
[15] Rao, S.I. and Hazzledine, P.M., Phil. Mag. A, 80(2000) 2011.Google Scholar
[16] Koehler, J.S., Phys Rev B, 2(1970) 547.Google Scholar
[17] Kamat, S.V., Hirth, J.P., Scripta Metall., 21(1987) 1587.Google Scholar
[18] Anderson, P.M., Li, C., Mater Res Soc Symp Proc, 308(1993) 731.Google Scholar
[19] Hoagland, R.G., Kurtz, R.J., and Henager, C.H., Scripta Materialia, 50(2004) 775.Google Scholar
[20] Misra, A., Hirth, J.P., and Hoagland, R.G., Acta Materialia, 53(2005) 4817.Google Scholar
[21] Hoagland, R.G., Hirth, J.P., Misra, A., Phil. Mag., 86(2006) 3537.Google Scholar
[22] Li, Q. and Anderson, P.M., Acta Materialia, 53(2005) 1121.Google Scholar
[23] Shen, Y. and Anderson, P.M., Acta Materialia, 54(2006) 3941.Google Scholar
[24] Hoagland, R.G., Hirth, J.P., Misra, A., Mitlin, D., Appl. Phys. Lett., 84(2004) 5136.Google Scholar
[25] Groh, S., Devincre, B., Kubin, L.P., Roos, A., Feyel, F., Chaboche, J.L., Phil. Mag. Lett., 83(2003) 303.Google Scholar
[26] Foreman, A., Phil. Mag., 15(1967) 1011.Google Scholar
[27] Pacheco, E.S., Mura, T., J. Mech. Phys. Sol., 17(1969) 163.Google Scholar
[28] Tabor, D., The Hardness of Metals, Oxford: Oxford University Press, 1951.Google Scholar
[29] Shen, Y.L., Tan, X.H., Journal of Materials Science, 40(2005) 4683.Google Scholar
[30] Lide, D., CRC Handbook of Chemistry and Physics, 2003-2004, 12-19 12–21.Google Scholar
[31] Hirth, J.P., Lothe, J., Theory of Dislocations, Krieger, Melbourne, Florida, 1982.Google Scholar
[32] Dyson, K.W., Dyson, D.J., and Keown, S.R., Interpretation of Electron Diffraction Patterns, Hilger, London, 1971.Google Scholar
[33] Fang, L. and Friedman, L.H., Acta Materialia, 55(2007) 15051.Google Scholar
[34] Shen, Y. and Anderson, P.M., J. Mech. Phys. Sol., 55(5)(2007) 956.Google Scholar
[35] Pant, P., Schwartz, K., Baker, S.P., Acta Materialia, 51(11)(2003) 3243.Google Scholar
[36] Akasheh, F., Zbib, H.M., Hirth, J.P., Hoagland, R.G., and Misra, A., J. Appl. Physics, 101(8)(2007) Art. No. 084314.Google Scholar