Hostname: page-component-745bb68f8f-kw2vx Total loading time: 0 Render date: 2025-01-12T21:58:46.189Z Has data issue: false hasContentIssue false
  • English
  • Français

Nondestructive Damage Sensitivity and Reinforcing Effect of Functionalized Carbon Nanotube and Nanofiber/Epoxy Composites Using Electro-Micromechanical Techniques

Published online by Cambridge University Press:  01 February 2011

Joung-Man Park ,
Jin-Kyu Jung ,
Sung-Ju Kim ,
Dae-Sik Kim ,
Jae-Rock Lee  and
Tae-Wook Kim
Joung-Man Park
Affiliation:
Department of Polymer Science and Engineering, Engineering Research Institute, Gyeongsang National University, Jinju 660–701, Korea
Jin-Kyu Jung
Affiliation:
Department of Polymer Science and Engineering, Engineering Research Institute, Gyeongsang National University, Jinju 660–701, Korea
Sung-Ju Kim
Affiliation:
Department of Polymer Science and Engineering, Engineering Research Institute, Gyeongsang National University, Jinju 660–701, Korea
Dae-Sik Kim
Affiliation:
Fiber Science Program, Cornell University, Ithaca, NY 14853–4401, U.S.A.
Jae-Rock Lee
Affiliation:
Advanced Materials Division, Korea Research Institute of Chemical Technology, Yusong, Taejeon, 305–600, Korea
Tae-Wook Kim
Affiliation:
Composite Materials Group, Korea Institute of Machinery and Materials, Chanwon 641–010, Korea
Get access

Abstract

Nondestructive damage sensing and load transfer mechanisms of thermal treated carbon nanotube (CNT) and nanofiber (CNF)/epoxy composites were investigated using electro-micromechanical technique. Carbon black (CB) was used only for the comparison. Electro-micromechanical techniques were applied to obtain the fiber damage and stress transferring effect of carbon nanocomposites with their contents. Thermal treatment and temperature affected on apparent modulus and electrical properties on nanocomposites due to enhanced inherent properties of each CNMs. Coefficient of variation (COV) of volumetric electrical resistance can be used to obtain the dispersion degree indirectly for various CNMs. Dispersion and surface modification are very important parameters to obtain improved mechanical and electrical properties of CNMs for multifunctional applications. Further optimized functionalization and dispersion conditions will be investigated for the following work continuously.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 851: Symposium NN – Materials for Space Applications , 2004 , NN2.5
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

(1) Allaoui, A., Bai, S., Cheng, H. M., and Bai, J. B., Compos. Sci. & Technol., 62, 1993 (2002).Google Scholar
(2) Pipes, R. B. and Hubert, P., Compos. Sci. & Technol., 62, 419 (2002).Google Scholar
(3) Liu, Y. J. and Chen, X. L., Mech. Mater., 35, 69 (2003).Google Scholar
(4) Lau, K. T., and Hui, D., Compos. Part B, 33, 263 (2002).Google Scholar
(5) Tsotra, P., and Friedrich, K., Compos. Part A, 34, 75 (2003).Google Scholar
(6) Park, J. M., Lee, S. I. and Lee, J. R., Proceedings of 47th Int. SAMPE Sym., Long Beach, CA, U.S.A., 47, pp. 12–16 (2002).Google Scholar
(7) Park, J. M., Lee, S. I., Kim, K. W. and Yoon, D. J., J. Colloid Interf. Sci., 237, 80 (2001).Google Scholar
(8) Weglikowska, U. D., Benoit, J. M., Chiu, P. W., Graupner, R., Lebedkin, S., Roth, S., Current Applied Physics, 2, 497 (2002).Google Scholar