Hostname: page-component-745bb68f8f-mzp66 Total loading time: 0 Render date: 2025-02-05T06:35:46.297Z Has data issue: false hasContentIssue false
  • English
  • Français

Nanostructured Hydroxyapatite Coatings for Improved Adhesion and Corrosion Resistance for Medical Implants

Published online by Cambridge University Press:  15 March 2011

Zongtao Zhang ,
Matthew F. Dunn ,
T. D. Xiao ,
Antoni P. Tomsia  and
E. Saiz
Zongtao Zhang
Affiliation:
Inframat® Corporation, 74 Batterson Park Road, CT 06032
Matthew F. Dunn
Affiliation:
Inframat® Corporation, 74 Batterson Park Road, CT 06032
T. D. Xiao
Affiliation:
Inframat® Corporation, 74 Batterson Park Road, CT 06032
Antoni P. Tomsia
Affiliation:
MS 62-203, Lawrence Berkeley Lab, Berkeley, CA 94720
E. Saiz
Affiliation:
MS 62-203, Lawrence Berkeley Lab, Berkeley, CA 94720
Get access

Abstract

Hydroxyapetite (HA) coating on medical implant has been used in commercial application for several decades. The coating, commercially made by thermal spray method, functions as a intermediate layer between human tissues and the metal implant. The coating can speed up early stage healing after operation but the life span is much limited by low interfacial bond strength, which comes from the dissolution of amorphous HA in human body fluid during its service. This amorphous phase is formed in coating process under high temperature. To overcome these problems, we have developed a novel room temperature electrophoretic deposition process to fabricate nanostructured HA coating. This nanostructured HA coating significantly improved coating's bond strength up to 50-60 MPa, 2-3 times better than the thermal sprayed HA coating. The nanostructured HA coating also has corrosion resistance 50-100 times higher than the conventional HA coating. X-ray diffraction shows that all the HA coating is fully crystalline phase. It is expected that the implants with the nanostructured HA coating will have much longer service life. Other benefits derived from this process include room temperature deposition, the ability to control the coating microstructure and phases, and low cost for production.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 703: Symposia U/V – Nanophase and Nanocomposite Materials IV , 2001 , V7.5
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]. Sun, Limin, Berndt, Christopher C., Gross, Karlis A., Kucuk, Ahmet, “Material Fundamentals and Clinical Performance of Plasma-Sprayed Hydroxyapatite Coatings A Review” J. Biomed. Mater.Res., Vo. 58, 570–592, 2001.Google Scholar
[2]. Ann, E.S., Gleason, N.J., Nakahira, A., and Ying, J.Y., “Nanostructured Processing of Hydroxyapatite-based Bioceramics,” MRS 1998 Fall Meeting, Abstract, pp. 611, private communication, Danny Xiao and Jackie Ying 1998.Google Scholar
[3]. Gleiter, H., “Materials with Ultrafine Microstructures: Retrospective and Perspectives,” Nanostructured Materials 1, 1–9, 1992.Google Scholar
[4]. Eastman, J. & Seigel, R., Research & Development, p.56, Jan. 1989.Google Scholar
[5]. Sarkar, P. and Nicholson, P.S. in a feature paper, “Electrophoretic Deposition (EPD): Mechanism, Kinetics, and Appl. to Ceramics,” J. Am cerm. Soc., 79[8] 1987–2002 (1996).Google Scholar
[6]. Ducheyne, P., Radin, S., Heughebaert, M., and Heughebaert, J.C., “Calcium Phosphate Ceramic Coating on porous Ti: Effect of Structure & Composition on Electrophoretic Deposition, Vacuum Sintering, and in Vitro Dissolution,” Biomaterials, 11, 244–54 (1990).Google Scholar
[7]. Nagai, M., Yamashita, K, and Umegaki, T., “Electrophoretic Deposition, of hydroxyapatite coating,” Phosphorous Research Bullin, Vol. 1, pp167, 1991.Google Scholar
[8]. Yamashita, K., Yongehara, E., Ding, X., Nagai, M., Umegaki, T., and Matsuda, M., “Electrophoretic coating of multilayered apatite composite on alumina ceramics,” J. Biomedical Mater. Res., Vol. 43, pp 46–53, 1998.Google Scholar
[9]. Vijayaraghavan, T.V. and Bensalem, A., “Electrodeposition of apatite coating on pure titanium and titanium alloys,” J. Mater. Sci. Lett., vol.13, pp. 1782–5, 1994.Google Scholar
[10]. Sousa, S.R and Barbosa, M.A., “Effect of hydroxyapatite thickness on Metal ion release from Ti6Al4V substrates, Bio materials 1996, vo.17, no.4, 397–404.)Google Scholar
[11]. Yang, CY, Wang, BC, Chang, E, Wu, BC. “Bond degradation at the plasma-sprayed HA coating/Ti-6Al-4V alloy interface: An in vitro study. J. Mater Sci: Mater Med 1995: 6: 258–265.Google Scholar
[12]. Han, Yong, Fu, Tao, Lu, Jian, Xu, Kewei, Characterization and stability of hydroxyapatite coatings prepared by an electrodeposition and alkaline-treated process.” J. Medical Mater. Research.” Vol.54, No.1, 96–101(2000).Google Scholar