Hostname: page-component-857557d7f7-qdphv Total loading time: 0 Render date: 2025-12-09T11:38:03.335Z Has data issue: false hasContentIssue false
  • English
  • Français

Nanocomposite Barrier Coatings for Elastomeric Applications

Published online by Cambridge University Press:  01 February 2011

H.A. Goldberg ,
C.A. Feeney ,
D.P. Karim  and
M. Farrell
H.A. Goldberg
Affiliation:
InMat LLC 216 Route 206, Suite 7 Hillsborough, NJ 08844
C.A. Feeney
Affiliation:
InMat LLC 216 Route 206, Suite 7 Hillsborough, NJ 08844
D.P. Karim
Affiliation:
InMat LLC 216 Route 206, Suite 7 Hillsborough, NJ 08844
M. Farrell
Affiliation:
InMat LLC 216 Route 206, Suite 7 Hillsborough, NJ 08844
Get access

Abstract

InMat LLC has developed aqueous, non-hazardous nanocomposite dispersions with a unique combination of barrier properties and flexibility. Using butyl rubber as the matrix, and very high aspect ratio vermiculite filler, flexible coatings with gas permeability 30-300 times lower than butyl rubber have been produced.[1,2] These coatings have been shown to be undamaged by strains up to 20%. The first commercial application of this technology (sold under InMat's trademark Air D-FenseTM) is in Wilson's new, longer life, Double CoreTM tennis ball.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 733: Symposium T – Polymer Nanocomposites , 2002 , T4.7
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

[1] Feeney, C.A., et al, Barrier Coating of an Elastomer and a Dispersed Layered Filled in a Liquid Carrier, US Patent 6,087,016; July 11, 2000. PCT Filed 6/98.Google Scholar
[2] Feeney, C.A., et al., Barrier Coating of an Elastomer and a Dispersed Layered Filled in a Liquid Carrier and Coated Articles, US Patent 6,232,389; May 15, 2001.Google Scholar
[3] Usuki, A., Tukigase, A., Kato, M.; “Preparation and properties of EPDM-clay hybrids”, Polymer 43; p 2185–2189; 2002.10.1016/S0032-3861(02)00013-7Google Scholar
[4] , Elspass, Chester, W. et al; “Tactoidal Elastomer Nanocomposites"; U.S. Patent 5,807,629; September 15, 1998.Google Scholar
[5] Kojima, Y. et al, “Gas permeabilities in rubber-clay hybrid”, Journal of Material Science Letters 12, p889–890, (1993).10.1007/BF00455608Google Scholar
[6] Cussler, E.L., Hughes, S. E., Ward, W. J., Rutherford, A.; “Barrier Membranes”; Journal of Membrane Science, 38; p 161–174; 1988.10.1016/S0376-7388(00)80877-7Google Scholar
[7] Ward, W.J, Gaines, G.L., Alger, M.M., Stanley, T.J; “Gas barrier improvement using vermiculite and mica in polymer films”; Journal of Membrane Science 55, p 173–180, 1991.10.1016/S0376-7388(00)82333-9Google Scholar
[8] Goldberg, H.A. et al, “Elastomeric Barrier Coatings for Sporting Goods”, ACS 161st Spring Technical Meeting, Rubber Division, Paper No. 17, to be presented April 29, 2002.Google Scholar