Hostname: page-component-745bb68f8f-kw2vx Total loading time: 0 Render date: 2025-02-02T20:06:07.711Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructural Stability Of a NiAI-Mo Eutectic Alloy

Published online by Cambridge University Press:  10 February 2011

M. T. Kush ,
J. W. Holmes  and
R. Gibala
M. T. Kush
Affiliation:
Present address: Rolls-Royce, P.O. Box 420, Speed Code 0–2, Indianapolis, 46206–0420
J. W. Holmes
Affiliation:
The University of Michigan, MEAM Department, Ann Arbor, MI 48109–2125
R. Gibala
Affiliation:
The University of Michigan, MSE Department, Ann Arbor, MI 48109–2136
Get access

Abstract

The microstructural stability of a directionally-solidified NiA1–9 at.% Mo quasi-binary alloy was investigated under conditions of thermal cycling between the temperatures 973 K and 1473 K utilizing time-temperature heating and cooling profiles which approximate potential engine applications. Two different microstructures were examined: a cellular microstructure in which the faceted secondphase Mo rods in the NiAl matrix formed misaligned cell boundaries which separated aligned cells approximately 0.4 mm in width and 5–25 mm in length, and a nearly fault-free fully columnar microstructure well aligned along the [001] direction. Both microstructures resisted coarsening under thermal cycling, but plastic deformation induced by thermal stresses introduced significant specimen shape changes. Surprisingly, the cellular microstructure, for which the cell boundary region apparently acts as a deformation buffer, exhibited better resistance to thermal fatigue than the more fault-free and better aligned columnar microstructure.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 552: Symposium KK – High-Temperature Ordered Intermetallic Alloys VIII , 1998 , KK9.3.1
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kraft, R.W. and Albright, D.L., Trans. Met. Soc. AIME 221, 95 (1961).Google Scholar
2. Heart, H.W. and Mack, D.J., Trans. Met. Soc. AIME 212, 664 (1958).Google Scholar
3. Bayles, B., Ford, J. and Salkind, M., Trans. Met. Soc. AIME 239, 844 (1967).Google Scholar
4. Cline, H.E., Walter, J.L., Lifshin, E. and Russel, R. R., Metall. Trans. 2, 189 (1971).CrossRefGoogle Scholar
5. Cline, H.E., Acta metall. 19, 481 (1971).CrossRefGoogle Scholar
6. Walter, J.L. and Cline, H.E., Metall. Trans. 1, 1221 (1970).CrossRefGoogle Scholar
7. Cline, H.E. and Walter, J.L., Metall. Trans. 1, 2907 (1970).CrossRefGoogle Scholar
8. Zinn, S. and Semiatin, S.L., Elements of Induction Heating: Design, Control and Applications, 4th ed. (ASM International, Materials Park, OH, 1995) 15.Google Scholar
9. ABAQUS Users Manual, Hibbitt, Karlsson and Sorensen, Inc., Providence, R.I., (1982).Google Scholar