Hostname: page-component-669899f699-2mbcq Total loading time: 0 Render date: 2025-04-26T10:40:36.877Z Has data issue: false hasContentIssue false
  • English
  • Français

Microcrystalline Silicon Tunnel Junctions for Amorphous Silicon-Based Multijunction Solar Cells

Published online by Cambridge University Press:  15 February 2011

A. S. Ferlauto ,
Joohyun Koh ,
P. I. Rovira ,
C. R. Wronski  and
R. W. Collins
A. S. Ferlauto
Affiliation:
Center for Thin Film Devices, The Pennsylvania State University, University Park, PA 16802.
Joohyun Koh
Affiliation:
Center for Thin Film Devices, The Pennsylvania State University, University Park, PA 16802.
P. I. Rovira
Affiliation:
Center for Thin Film Devices, The Pennsylvania State University, University Park, PA 16802.
C. R. Wronski
Affiliation:
Center for Thin Film Devices, The Pennsylvania State University, University Park, PA 16802.
R. W. Collins
Affiliation:
Center for Thin Film Devices, The Pennsylvania State University, University Park, PA 16802.
Get access

Abstract

The formation of tunnel junctions for applications in amorphous silicon (a-Si:H) based multijunction n-i-p solar cells has been studied using real time optics. The junction structure investigated in detail here consists of a thin (~200 Å) layer of n-type microcrystalline silicon (μc-Si:H) on top of an equally thin layer of p-type μc-Si:H, the latter deposited on thick (~2000 Å) intrinsic a-Si:H. Such a structure has been optimized in an attempt to obtain single-phase μc-Si:H with a high crystallite packing density and large grain size for both layers of the tunnel junction. We have explored the conditions under which grain growth is continuous across the p/n junction and conditions under which renucleation of n-layer grains can be ensured at the junction. One important finding of this study is that the optimum conditions for single-phase, high-density μc-Si:H n-layers are different depending on whether the substrate is a μc-Si:H p-layer or is a H2-plasma treated or untreated a-Si:H i-layer. Thus, the top-most μc-Si:H layer of the tunnel junction must be optimized in the multijunction device configuration, rather than in single cell configurations on a-Si:H i-layers. Our observations are explained using an evolutionary phase diagram for a-Si:H and μc-Si:H film growth versus thickness and H2-dilution ratio, in which the boundary between the two phases is strongly substrate-dependent.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 557: Symposium A – Amorphous and Heterogeneous Silicon Thin Films—Fundamentals to Devices—1999 , 1999 , 579
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

[1] Guha, S., Yang, J., Nath, P., and Hack, M., Appl. Phys. Lett. 49, 218 (1986).Google Scholar
[2] Rath, J.K., Rubinelli, F., and Schropp, R.E.I., J. Non-Cryst. Solids 227–230, 1282 (1998).Google Scholar
[3] Koh, J., Fujiwara, H., Wronski, C.R., and Collins, R.W., Sol. Energy Mater. Sol. Cells 49, 135 (1997).Google Scholar
[4] Pernet, P., Goetz, M., Keppner, H., and Shah, A., Mater. Res. Soc. Symp. Proc. 452, 889 (1997).Google Scholar
[5] Smith, L.L., Read, W.W., Yang, C.S., Srinivasan, E., Courtney, C.H., Lamb, H.H., and Parsons, G.N., J. Vac. Sci. Technol. A 16, 1316 (1998).Google Scholar
[6] Cabarrocas, P. Roca i and Hamma, S., Thin Solid Films 337, 23 (1999).Google Scholar
[7] Koh, J., Fujiwara, H., Koval, R., Wronski, C.R., and Collins, R.W., J. Appl. Phys. (in press, April 1999).Google Scholar
[8] Lee, J., Rovira, P.I., An, I., and Collins, R.W., Rev. Sci. Instrum. 69, 1800 (1998).Google Scholar
[9] Koh, J., Lee, Y., Fujiwara, H., Wronski, C.R., and Collins, R.W., Appl. Phys. Lett. 73, 1526 (1998).Google Scholar
[10] Tsai, C.C., in Amorphous Silicon and Related Materials, Vol. A, edited by Fritzsche, H., (World Scientific, Singapore, 1989) p. 123.Google Scholar