Hostname: page-component-745bb68f8f-s22k5 Total loading time: 0 Render date: 2025-01-27T13:21:26.875Z Has data issue: false hasContentIssue false
  • English
  • Français

Interfacial Reactions in Ti-6Al-4V with Laser-Embedded SiC Particles and the Origin of Intergranular Corrosion Susceptibility of an Al-Mg Alloy

Published online by Cambridge University Press:  10 February 2011

B. J. Kooi  and
J.Th.M. De Hosson
B. J. Kooi
Affiliation:
Dept. Applied Physics, Materials Science Center and Netherlands, Institute for Metals Research, University of Groningen, Nijenborgh 4, 9747AG Groningen, The Netherlands
J.Th.M. De Hosson
Affiliation:
Dept. Applied Physics, Materials Science Center and Netherlands, Institute for Metals Research, University of Groningen, Nijenborgh 4, 9747AG Groningen, The Netherlands
Get access

Abstract

In the first part of the paper the microstructure of Ti-6Al-4V with laser embedded SiC particles is explained. The interfacial reaction between Ti and SiC is responsible for the largely improved wear resistance of the Ti alloy. In the second part the phase responsible for the intergranular corrosion susceptibility of an Al-Mg alloy when annealed above 65 °C is identified and possible mechanisms to solve this interfacial problem are proposed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 586: Symposium M – Interfacial Engineering for Optimized Properties II , 1999 , 93
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Kloosterman, A.B. and Hosson, J.Th.M. De, in: Surface Modification Technologies IX, ed.Sudarshan, T.S., Jeandin, M., Khor, K.A., Institute of Materials, London, 1998, p. 625.Google Scholar
2 Metals Handbook 9th ed., Vol.2, p.216/217, ASM, Metals Park, Ohio, 1979.Google Scholar
3 Kloosterman, A.B., Kooi, B.J., Hosson, J.Th.M De, Acta Mater. 46, 6205 (1998).Google Scholar
4 Kooi, B.J., Kabel, M., Kloosterman, A.B., Hosson, J.Th.M. De, Acta Mater. 47, 3105 (1999).Google Scholar
5 Tsurekawa, S., Yoshinaga, H., J. Jap. Inst. Metals 58, 390–396 (1994).Google Scholar
6 Zhao, Q. H. et al. J, J. Mater. Res. 9, 2096–2101 (1994); F.R. Chien, S.R. Nutt, D.Cummings, Phil. Mag. A 68, 325–348 (1993); G. E. Hollox, R.E. Smallman, J. Appl. Phys. 37, 818–823 (1968); J. Venables, Phil. Mag. 26, 873–890 (1967), Metall. Trans. 1, 2471–2476 (1970).Google Scholar
7 ASM handbook, volume 13, ASM International, Ohio, USA, 1992, p.239 Google Scholar