Hostname: page-component-54dcc4c588-br6xx Total loading time: 0 Render date: 2025-09-14T15:58:41.274Z Has data issue: false hasContentIssue false
  • English
  • Français

In-Situ Ellipsometric Monitoring of the Electron Cyclotron Resonance Etching of Diamond-Like Carbon

Published online by Cambridge University Press:  22 February 2011

N.J. Ianno ,
S. Ahmer ,
S. Pittal  and
John A. Woollam
N.J. Ianno
Affiliation:
Center for Microelectronic and Optical Materials Research, and Dept. of Electrical Engineering, University of Nebraska, 209N WSEC, Lincoln, NE 68588–0511
S. Ahmer
Affiliation:
Center for Microelectronic and Optical Materials Research, and Dept. of Electrical Engineering, University of Nebraska, 209N WSEC, Lincoln, NE 68588–0511
S. Pittal
Affiliation:
J.A. Woollam Co., Inc., 650 J Street, Suite 39, Lincoln, NE 68508
John A. Woollam
Affiliation:
J.A. Woollam Co., Inc., 650 J Street, Suite 39, Lincoln, NE 68508
Get access

Abstract

The electron cyclotron resonance (ECR) etching of diamond-like carbon films in an oxygen plasma has been studied. The input variables were flow rate, pressure, power, and bias, while the output parameters were etch rate, and uniformity. In-situ ellipsometry, performed at 44 wavelengths simultaneously, was employed to monitor the etch process in real time. We will show that DLC films can be etched without an applied bias, but the application of an rf induced dc bias greatly enhances etch uniformity. Further, the etch rate is a strong function of the bandgap of the DLC film.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 349: Symposium T – Novel Forms of Carbon II , 1994 , 535
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Asmussen, J., in Handbook of Plasma Processing, edited by Rossnagel, S.M., Cuomo, J.J., and Westwood, W.D. (Noyes Publ., New Jersey, 1990), pp. 285–307.Google Scholar
2. Matsuo, S., in Handbook of Thin Film Deposition Processes and Techniques, edited by Schuegraf, K.K. (Noyes Publ., New Jersey, 1988), pp. 147–169.Google Scholar
3. Pomot, C., Mahi, B., Petit, B., Arnal, Y., and Pelletier, J., J. Vac. Sci. Technol., B4, 1 (1986).Google Scholar
4. Hopwood, J., Dahimene, M., Reinhard, D.K., and Asmussen, J., J.Vac. Sci. Technol., B6, 268 (1988).Google Scholar
5. Azzam, R.M.A. and Bashara, N.M., Ellipsometry and Polarized Light (North-Holland, New York, 1977).Google Scholar
6. Johs, B., Meyer, D., Cooney, G., Yao, H., Snyder, P.G., Woollam, J. A., Edwards, J., and Maracos, G., Mat. Res. Symp. Proc. 216, 459 (1991).Google Scholar
7. McGahan, W.A., Johs, B., and Woollam, J.A., Thin Solid Films, 234, 443 (1993).Google Scholar
8. Snyder, P.G., Woollam, J.A., Alterovitz, S.A., and Johs, B., J. Appl. Phys., 68, 5925 (1990).Google Scholar
9. Angus, J.C., Koidl, P., and Domitz, S., in Plasma Deposited Thin Films, edited by Mort, J. and Jansen, F. (CRC Press, Boca Raton, Florida, 1985), p. 103.Google Scholar
10. Tauc, J., Grigonovici, R., and Vancu, A., Phys. Status Solidi., 15, 627 (1966).Google Scholar
11. Datta, T., Woollam, J.A., and Notohamiprodjo, W., Phys. Rev. B, 40, 5956 (1989).Google Scholar
12. Koenig, H.R. and Maissel, L.I., IBM J. Res. Develop., 14, 168 (1970).Google Scholar
13. Coburn, J.W. and Kay, E., J. Appl. Phys., 43, 4965 (1972).Google Scholar