Hostname: page-component-745bb68f8f-b6zl4 Total loading time: 0 Render date: 2025-01-29T00:06:50.253Z Has data issue: false hasContentIssue false
  • English
  • Français

Innovative And Cost-Effective Microfabrication Of Nanoceramic Components

Published online by Cambridge University Press:  15 March 2011

Balakrishnan G. Nair
Balakrishnan G. Nair*
Affiliation:
Ceramatec Inc. Salt Lake City, UT 84119
Get access

Abstract

An innovative and cost-effective processing technique has been developed at Ceramatec Inc for the microfabrication of ceramic components requiring very high dimensional tolerance. The materials system is a proprietary nanophase composition called CERCANAM (CERamatec CAstable NAno Material). Scanning electron microscopy revealed that CERCANAM components can be fabricated with dimensional tolerance as high as ± 2 [.proportional]m for surface features on the die that have dimensions about 1 mm. The process can also be modified to fabricate nanoporous ceramic components with very high surface areas. Components with retained surface areas as high as 67-82% of the starting powder were fabricated. The fabrication process does not involve a high-temperature sintering step, which eliminates the loss of surface area from high temperature sintering. It is anticipated that microcomponents fabricated with specific microstructures and properties will have applications in the optical fiber industry as interconnects, in the electronic packaging industry and the chemical industry.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 703: Symposia U/V – Nanophase and Nanocomposite Materials IV , 2001 , V9.7
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Chen, C. P. and Leipold, M. H., “Fracture toughness of silicon,” Am. Ceram. Soc. Bull. 59 [4] 469–72 (1980).Google Scholar
2 Declerck, G. J., “Silicon oxidation,” Microelectron. Mater. Processes 164 79–132 (1989).Google Scholar
3 Liew, L-A., Zhang, W., An, L., Shah, S., Luo, R., Liu, Y., Cross, T., Dunn, M. L., Bright, V., Daily, J. W. and Raj, R., “Ceramic MEMS: New Materials, Innovative Processing and Future Applications,” Am. Ceram. Soc. Bull. 80 [5] 25–30 (2000).Google Scholar
4 Schonholzer, U. P., Hummel, R., , Rene and Gauckler, L. J., “Microfabrication of ceramics by filling of photoresist molds,” Adv. Mater., 12 [17] 1261–1263 (2000).Google Scholar