Hostname: page-component-cb9f654ff-mx8w7 Total loading time: 0 Render date: 2025-09-10T00:31:23.606Z Has data issue: false hasContentIssue false
  • English
  • Français

Indentation Technique to Investigate Elastic Moduli of Thin Films on Substrates

Published online by Cambridge University Press:  22 February 2011

D. S. Stone ,
T. W. Wu ,
P.-S. Alexopoulos  and
W. R. Lafontaine
D. S. Stone
Affiliation:
Materials Science and Engineering, Bard Hall, Cornell University, Ithaca, NY 14853; presently at Materials Science and Engineering, University of Wisconsin, 1509 University Avenue, Madison, WI 53706
T. W. Wu
Affiliation:
IBM Research Division, Almaden Research Center, IBM Magnetic Recording Institute, San Jose, CA 95120-6099
P.-S. Alexopoulos
Affiliation:
Materials Science and Engineering, Bard Hall, Cornell University, Ithaca, NY 14853; presently at Materials Science and Engineering, University of Wisconsin, 1509 University Avenue, Madison, WI 53706
W. R. Lafontaine
Affiliation:
Materials Science and Engineering, Bard Hall, Cornell University, Ithaca, NY 14853
Get access

Abstract

Closed-form elasticity solutions are introduced, that predict the average displacement beneath square and triangular, uniformly loaded areas at the surface of a bilayer. The solutions aid in the application of depth-sensing indentation techniques for measuring thin film elastic moduli. The elasticity solutions agree closely with experimental data of Al, Si, 1 μm Al on Si, and 2 μm Cr on Si. The case of poor adhesion between the film and substrate is briefly examined.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 130: Symposium C – Thin Films: Stresses and Mechanical Properties I , 1988 , 105
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Doerner, M. F. and Nix, W. D., J. Mat. Res. 14 (1986) pp. 601–609.10.1557/JMR.1986.0601Google Scholar
2. Loubet, J. L., Georges, J. M., and Meille, G. F., in Microindentation Techniques in Materials Science and Engineering, Blau, P. J. and Lawn, B. R., Eds., ASTM-STP 889, American Society for Testing and Materials, Philadelphia, PA (1986) pp. 72–89.Google Scholar
3. Pethica, J., Hutchings, R., and Oliver, W. C., Phil. Mag. A 48 (1983) pp. 593–606.10.1080/01418618308234914Google Scholar
4. Wu, T.-W., Hwang, C., Lo, J., and Alexopoulos, P., in Thin Solid Films, in print.Google Scholar
5. Hannula, S.-P., Stone, D., and Li, C.-Y., Mat. Res. Soc. Symp. Proc. 40 (1985) pp. 217–224.10.1557/PROC-40-217Google Scholar
6. Stone, D., Wu, T.-W., LaFontaine, W. R., and Alexopoulos, P., Unpublished work.Google Scholar
7. King, R. B., Int. J. Solids Structures, 23(12) (1987) pp. 1657–1664.10.1016/0020-7683(87)90116-8Google Scholar
8. Chou, P. C. and Pagano, N. J., Elasticity, Tensor Dyadic, and Engineerinq Approaches, D. Van Nostrand, New York (1967) pp. 266–282.Google Scholar
9. Burmister, D. M., J. Appl. Phys., 16 (1945) pp. 89–94.10.1063/1.1707558Google Scholar
10. Timoshenko, S. and Goodier, J. N., Theory of Elasticity, McGraw-Hill, NY (1951) pp. 370–372.Google Scholar
11. Hirth, J. P. and Lothe, J., Theory of Disclocations, McGraw-Hill, NY (1968) pp. 761–762.Google Scholar
12. Burmister, D. M., J. Appl. Phys., 16 (1945) pp. 126–302.10.1063/1.1707562Google Scholar