Hostname: page-component-745bb68f8f-g4j75 Total loading time: 0 Render date: 2025-02-05T06:08:27.019Z Has data issue: false hasContentIssue false
  • English
  • Français

In Situ Preparation of Y‐Ba‐Cu‐O Thin Films on Silicon Single Crystals

Published online by Cambridge University Press:  28 February 2011

Hanns—Ulrich Habermeier ,
Gunter Wagner  and
Günter Mertens
Hanns—Ulrich Habermeier
Affiliation:
Max—Planck—Institut für Festkürpenorschung, Heisenbergstr.l, D—7ooo Stuttgart, Federal Republic of Germany
Gunter Wagner
Affiliation:
Max—Planck—Institut für Festkürpenorschung, Heisenbergstr.l, D—7ooo Stuttgart, Federal Republic of Germany
Günter Mertens
Affiliation:
Max—Planck—Institut für Festkürpenorschung, Heisenbergstr.l, D—7ooo Stuttgart, Federal Republic of Germany
Get access

Abstract

Superconducting Y—Ba—Cu—O thin films with critical temperatures exceeding 80 K are deposited on silicon single crystal substrates using the pulsed laser deposition technique. Deposition from a sintered Y1 Ba2Cu3O7‐ target in oxygen ambient of 0.1 — 5 mbar onto substrates kept at 700°C to 820°C results in crystalline films in which the target composition of the metallic constituents is preserved. No post deposition treatments are required to obtain high values for the zero resistance. X— ray analysis as well as Raman spectroscopy reveal that specimens prepared at optimum conditions are single phase c—axis oriented. In contrast to films prepared on LaAlO3 or SrTiO3 the surface morphology shows a granular structure. The films prepared by this technique are quite stable against chemicals used in conventional lithographic patterning, however, a strong correlation between film quality before patterning and some degradation after patterning is observed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 169: Symposium M – High Temperature Superconductors: Fundamental Properties and Novel Materials Processing , 1989 , 477
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Gurvich, M. and Fiory, A.T., Appl. Phys. Lett. 51,1027 (1987)Google Scholar
2 Silver, R.M., Berezin, A.B., Wendemann, M., and DeLozanne, A.L., Appl. Phys. Lett 52, 2174 (1988)Google Scholar
3 Chien, C.L., Xiao, G., Stretz, F.H., Gavrin, A., and Cieplak, M.Z., Appl. Phys. Lett. 51, 2155 (1987)Google Scholar
4 Harada, K., Fukimori, N., and Yazu, S., Jpn.J.Appl.Phys. 27,L 1524 (1988)Google Scholar
5 Berberich, P., Tate, J., Dietsche, W., and Kinder, H., Appl. Phys. Lett. 53, 925 (1988)Google Scholar
6 Venkatesan, T., Chase, E.W., Wu, X.D., Inam, A., Chang, C.C., and Shokoohi, F., Appl. Phys. Lett. 53, 243 (1988)Google Scholar
7 Habermeier, H—U. and Mertens, G., Physica (in the press)Google Scholar
8 Venkatesan, T., Solid State Technology 30 (12), 39 (1987)Google Scholar
9 Habermeier, H.‐U. and Mertens, G., Physica C 153‐155, 1429 (1988)Google Scholar