Hostname: page-component-745bb68f8f-d8cs5 Total loading time: 0 Render date: 2025-02-10T12:55:03.111Z Has data issue: false hasContentIssue false
  • English
  • Français

Evaluation of the Humidification Requirements of New Proton Exchange Membranes for Fuel Cells

Published online by Cambridge University Press:  15 February 2011

Stephen A. Grot ,
J.C. Hedstrom  and
N.E. Vanderborgh
Stephen A. Grot
Affiliation:
Engineering Sciences & Applications Division, Electrochemical Engine Project Los Alamos National Laboratory, Los A lamos, NM 87545 LAUR 95-1359
J.C. Hedstrom
Affiliation:
Engineering Sciences & Applications Division, Electrochemical Engine Project Los Alamos National Laboratory, Los A lamos, NM 87545 LAUR 95-1359
N.E. Vanderborgh
Affiliation:
Engineering Sciences & Applications Division, Electrochemical Engine Project Los Alamos National Laboratory, Los A lamos, NM 87545 LAUR 95-1359
Get access

Abstract

Measurements of PEM fuel cell device performance were made with different gas inlet temperatures and relative humidity using a newly-designed test fixture. Significant improvement in device performance was observed when the fuel inlet temperature was increased above the operating temperature of the cell. These measurements were then correlated to a model to describe energy and mass transport processes.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 393: Symposium W – Materials for Electrochemical Energy Storage and Conversion , 1995 , 163
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

References:

1 Nguyen, T., Guante, J., and Vanderborgh, N. E., “Ion Transport through Polyperfluorosulfonic Acid Membranes,” Materials Research Society Fall Meeting, Boston, MA; November 28-December 2,1988.Google Scholar
2 Nguyen, T. V. and White, R. E., “A Water and Heat Management Model for Proton-Exchange-Membrane Fuel Cells,” J. Electrochem. Soc., 140, 2178 (1993).Google Scholar