Hostname: page-component-745bb68f8f-b95js Total loading time: 0 Render date: 2025-02-04T16:46:20.475Z Has data issue: false hasContentIssue false
  • English
  • Français

Dielectric Properties of BaTiO3 Based Ceramics Prepared from Nano-powders

Published online by Cambridge University Press:  01 February 2011

Xiao-Hui Wang ,
Ren-Zheng Chen ,
Zhi-Lun Gui  and
Long-Tu Li
Xiao-Hui Wang
Affiliation:
State Key Lab of New Ceramics and Fine Processing, Department of Materials Science and Engineering, Tsinghua University, Beijing, 100084, P. R. China Email: wxh@tsinghua.edu.cn
Ren-Zheng Chen
Affiliation:
State Key Lab of New Ceramics and Fine Processing, Department of Materials Science and Engineering, Tsinghua University, Beijing, 100084, P. R. China Email: wxh@tsinghua.edu.cn
Zhi-Lun Gui
Affiliation:
State Key Lab of New Ceramics and Fine Processing, Department of Materials Science and Engineering, Tsinghua University, Beijing, 100084, P. R. China Email: wxh@tsinghua.edu.cn
Long-Tu Li
Affiliation:
State Key Lab of New Ceramics and Fine Processing, Department of Materials Science and Engineering, Tsinghua University, Beijing, 100084, P. R. China Email: wxh@tsinghua.edu.cn
Get access

Abstract

In this paper, the BaTiO3 nanoceramics have been fabricated by pressureless sintering for the first time. High purity BaTiO3 powders in nano-size of 50∼80nm synthesized by wet chemical method were used to fabricate nanoceramics. The addition of an appropriate amount of Nb2O5 and Co3O4 was found to suppress the grain growth, which is normally encountered in the conventional pressless sintering. The effects of Nb2O5 and Co3O4 on the phase structure, microstructure and dielectric properties of the sintered ceramics were investigated. The BaTiO3 ceramics with the average grain size less than 100nm were achieved after sintering below 1220°C with dielectric constant up to 2000 at room temperature, which is of cubic structure and meets the requirement of X7R specification.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 783: Symposium B – Materials, Intergration, and Packaging Issues for High-Frequency Devices , 2003 , B5.5
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Sakabe, Yukio, Ceram. Trans. 97, 3 (1997)Google Scholar
2. Uchino, K., Sadanage, E. and Hirose, T., J. of Am. Ceram. Soc. 72, 1555 (1989)Google Scholar
3. Henning, D. and Schreinemacher, S., J. of Euro. Ceram. Soc. 9, 41 (1992)Google Scholar
4. Vande Veld, G.M.H., Nucl. Chem., 39, 1363 (1977)Google Scholar
5. Furg, T. T., Lin, H. B. and Hwana, J. B., J. Am. Ceram. Soc. 73(11)(1990) 3363 Google Scholar
6. Schrey, F., J. Am. Ceram. Soc., 48(8), 401 (1965)Google Scholar
7. Galasso, F.S., Properties and preparation of perovskite type components, Pregamon Press, London, 1969 Google Scholar
8. Hennings, K. F. K. and Schreinemacher, B. S., J. of Euro. Cram. Soc. 14, 463 (1994)Google Scholar