Hostname: page-component-54dcc4c588-rz4zl Total loading time: 0 Render date: 2025-10-06T14:27:42.621Z Has data issue: false hasContentIssue false
  • English
  • Français

The Design of a TM10 Resonant Cavity Microwave Applicator as a Preheating Andcrosslinking Die for Pultruded Composites

Published online by Cambridge University Press:  28 February 2011

S.R. Ghaffariyan  and
J.M. Methven
S.R. Ghaffariyan
Affiliation:
Division of Polymer Engineering, UMIST, PO Box 88, Manchester M60 IQ0, England
J.M. Methven
Affiliation:
Division of Polymer Engineering, UMIST, PO Box 88, Manchester M60 IQ0, England
Get access

Abstract

Pultrusion is the only continuous process available for the manufacture of fibre reinforced thermosetting composites. It its simplest form it requires that dry reinforcement inthe form of continuous rovings or fabrics is pulled through a shallow bath of resin and then through a heated metal die wherein the resin crosslinks to a rigid network. The rate of manufacture (pulling speed) depends on two factors; the rate of heat transfer to and through the composite by conduction from the (heated) die wall and the rate of heat generated internally by the (exothermic) crosslinking reaction.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 189: Symposium L – Microwave Processing of Materials II , 1990 , 135
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Incopera, F.P. and Witt, D.P. De, Fundamentals of Heat and Mass Transfer, 2nd ed. (John Wiley and Sons, New York, 1985), p186.Google Scholar
2. Methven, J.M. and Ghaffariyan, S.R., Heat Transfer and Chemical Reaction in Pultrusion, UMIST Polymer Engineering Division Report Number 6, 1989.Google Scholar
3. Ku, C.C. and Liepens, R., Electrical Properties of Polymers, (Hanser, Munich, 1987), Appendices 1-3.Google Scholar
4. Roberts, S. and Hippel, A. von, J. Appl. Physics, 17, 610, (1946)Google Scholar
5. Nelson, S.O., Stetson, L.E. and Schlapoff, C.W., IEEE Transactions on Instrumentation and Measurement, IM23(4), 455, (1974).Google Scholar
6. Teasdale, R.D. and Crawford, G.N., Proc. National Electricity Conference 8, 296 (1952)Google Scholar