Hostname: page-component-745bb68f8f-d8cs5 Total loading time: 0 Render date: 2025-01-28T23:32:19.315Z Has data issue: false hasContentIssue false
  • English
  • Français

Current Density Effects on the Corrosion of Ceramic and Metallic Electrode Materials in Waste Glasses

Published online by Cambridge University Press:  15 February 2011

E. Wang ,
R. K. Mohr ,
A. C. Buechele  and
I. L. Pegg
E. Wang
Affiliation:
Vitreous State Laboratory, The Catholic University of America, Washington D.C. 20064
R. K. Mohr
Affiliation:
Vitreous State Laboratory, The Catholic University of America, Washington D.C. 20064
A. C. Buechele
Affiliation:
Vitreous State Laboratory, The Catholic University of America, Washington D.C. 20064
I. L. Pegg
Affiliation:
Vitreous State Laboratory, The Catholic University of America, Washington D.C. 20064
Get access

Abstract

Vitrification by joule-heating requires suitable electrode materials. Molybdenum electrodes are used often in high temperature (∼1500°C) joule-heated melters producing commercial glass while Inconel 690 has been the material of choice for lower temperature (∼1150°C) high-level nuclear waste vitrification. Vitrification of diverse waste streams at higher-temperatures places increasingly severe demands upon the electrode materials. Some commercially available ceramics possess sufficient conductivity at high temperatures to be used as electrodes. Many mixed- and low-level waste vitrification applications involve significant amounts of reducible species that accelerate the corrosion process for metallic electrodes. In addition, the corrosion rate of all electrode materials depends on the electrode current density. A special test rig was designed that measures the dependence of corrosion rate on both current density and temperature over extended periods of time. Molybdenum, Inconel 690, and three types of commercial ceramic coupons were tested over a range of conditions in simulated waste glasses containing key reducible species (e.g., PbO, CuO, ZnO, SO3). The corrosion rates show strong dependencies on the current density. Coupons were sectioned and the glass-coupon interface examined using Scanning Electron Microscopy (SEM) coupled with Energy Dispersive Spectroscopy (EDS). Cu, Pb, Ni and Sn were found to be reduced to their metallic states at the molybdenum coupon surfaces and were active in the corrosion process.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 412: Symposium V – Scientific Basis for Nuclear Waste Management XIX , 1995 , 173
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Penberthy, Larry, The Handbook of Glass Manufacturing, ed. by Tooley, F. V., 1, 389–454. Books for Industry, Inc. and Glass Industry Magazine, New York (1974).Google Scholar
2. Wersenburger, S., Proceedings of the American Nuclear Society Topical Meeting on the Treatment and Handling of Radioactive Wastes, Richland, Washington, April 19-22, 1986 CONF-820424, Battelle Press.Google Scholar
3. Xing, S.B., Lin, Y., Mohr, R.K., and Pegg, I.L., “Corrosion Resistance of Ceramic Refractories to Simulated Waste Glasses at High Temperatures.” (this conference).Google Scholar
4. Volf, M.B., Chemical Approach to Glass, Elsevier Science Publishing Company Inc., New York, New York (1984).Google Scholar