Hostname: page-component-745bb68f8f-b6zl4 Total loading time: 0 Render date: 2025-02-10T12:42:38.818Z Has data issue: false hasContentIssue false
  • English
  • Français

Chemical Vapor Deposition of Lead-Titanate

Published online by Cambridge University Press:  25 February 2011

Anton C. Greenwald ,
James T. Daly  and
Nader M. Kalkhoran
Anton C. Greenwald
Affiliation:
Spire Corporation, One Patriots Park, Bedford MA 01730-2396
James T. Daly
Affiliation:
Spire Corporation, One Patriots Park, Bedford MA 01730-2396
Nader M. Kalkhoran
Affiliation:
Spire Corporation, One Patriots Park, Bedford MA 01730-2396
Get access

Abstract

Thin films of lead-titanate were deposited by chemical vapor deposition (CVD) using tetraethyl lead and titanium isopropoxide. Good high frequency hysteresis curves were obtained with platinum contacts. Low resistance of the material (estimated at 108 ohm-cm) affected low frequency measurements.

Optimized experimental parameters (pressure, temperature, gas flows, oxidizer) were derived from a designed experimental matrix using response surface methodology. This approach significantly reduced the number of deposition trials required.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 243: Symposium G – Ferroelectric Thin Films II , 1991 , 229
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Okuyama, M. et al. , Ferroelectrics 63, 243 (1985).Google Scholar
2. Kwak, B.S. et al. , Appl. Phys. Lett. 53 1702 (1988).Google Scholar
3. Yoon, S.G. and Kim, H.G., J. Electrochem. Soc. 135, 3137 (1988).Google Scholar
4. Okada, M. et al. , Jap. J. Appl. Phys. 28, 1030 (1989)Google Scholar
5. Swartz, S. et al. , Ferroelectrics 93, 37 (1989).Google Scholar
6. DePinto, G. and Cherniawski, M., “Optimizing an Interpoly Dielectric with Taguchi Methods,” Semic. Int'l., 13, 102 (1990).Google Scholar
7. Daniel, D.W., Bloom, R., and Reece, J.E., “Identifying an Etch Process Window Using Repsonse Surface Methodology,” Sol. State TEch., 31, 117 (1988).Google Scholar
8. Selbrede, S.C., “CVD of Tungsten Silicide using Dichlorosilane,” Semic. Int'l., 11, 88 (1988).Google Scholar
9. Box, G.E.P. and Draper, W.R., Empirical Model-Building and Response Surfaces, John Wiley & Sons: New York (1987).Google Scholar
10.Spire Corporation, Bedford, MA 01730.Google Scholar
11. Keijser, M. de et al. , Appl. Phys. Lett. 58, 2636 (1991).Google Scholar