Hostname: page-component-745bb68f8f-5r2nc Total loading time: 0 Render date: 2025-02-05T15:23:01.168Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of Tantalum Oxide Thin Film and its Electrodes for DRAM's Capacitor Application

Published online by Cambridge University Press:  21 February 2011

Jong-Wan Park ,
Seok-Ryong Jeon ,
Jae-Suk Lee  and
Jeong-Youb Lee
Jong-Wan Park
Affiliation:
Department of Metallurgical Engineering, Hanyang Uni v., Seoul, 133–791, KOREA
Seok-Ryong Jeon
Affiliation:
Department of Metallurgical Engineering, Hanyang Uni v., Seoul, 133–791, KOREA
Jae-Suk Lee
Affiliation:
Department of Metallurgical Engineering, Hanyang Uni v., Seoul, 133–791, KOREA
Jeong-Youb Lee
Affiliation:
Department of Metallurgical Engineering, Hanyang Uni v., Seoul, 133–791, KOREA
Get access

Abstract

Thermal stability, microstructure and electrical property of molybdenum nitride film were studied for application of ULSI's DRAM capacitor electrode and copper diffusion barrier. Phase transformation from Mo to γ-Mo2N was observed at 20% N2/(Ar+N2) flow ratio and γ-Mo2N and Δ-MoN phases coexisted at 50% N2 flow ratio. γ-Mo2N film was found to crystallize at 400°C. Amorphous γ-Mo2N deposited at 300 °C remained stable upon 750 °C heat treatment. Breakdown strengths of Y -Mo2N/Ta2O&/Si MOS capacitor before and after 850 °C annealing were 2.4 MV/cm and 1.85 MV/cm at 1×10-6 A/cm2, respectively. After 850 °C annealing, dielectric constant of Ta2Os film decreased to 19.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 355: Symposium B1 – Evolution of Thin-Film and Surface Structure and Morphology , 1994 , 483
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ting, C. Y. and Wittmer, M., Thin Solid Films, 96, 327 (1982)Google Scholar
2. Wittmer, M., J. Vac. Sci. Technol., A3(4), 1797 (1985)Google Scholar
3. Holloway, K., Fryer, M., Cabrai, C. Jr, Harper, J. M. E., Bailey, P. J. and Kelleher, K. H., J. Appl. Phys., 71(11), 5433 (1992)Google Scholar
4. Redkar, S. and Kim, K. B., J. Appl. Phys., 68(10), 5176 (1990)Google Scholar
5. Shih, K. K. and Dove, D. B., J. Vac. Sci. Technol., A8(3), 1359 (1990)Google Scholar
6. Danroc, J., Aubert, A. and Gület, R., Thin Solid Films, 159, 281 (1987)Google Scholar
7. Kawaguchi, K. and Shin, S., J. Appl. Phys., 67(2), 921 (1990)Google Scholar
8. Anitha, V. P., Bhattacharya, A., Patii, N. G. and Major, S., Thin Solid Films, 236, 306 (1993)Google Scholar
9. Charai, A., Horustrom, H. E., Thomas, O., Fryer, P. M. and Harpr, J. M. E., J. Vac. Sci. Technol., A 7, 784 (1989)Google Scholar