Hostname: page-component-857557d7f7-qr8hc Total loading time: 0 Render date: 2025-11-21T15:18:48.796Z Has data issue: false hasContentIssue false
  • English
  • Français

Boron Implantation into Silicon Subject to Hydrogen Plasma

Published online by Cambridge University Press:  17 March 2011

Sanjay Rangan ,
Mark Horn  and
S. Ashok
Sanjay Rangan
Affiliation:
Electronic Materials and Processing Research Laboratory, The Pennsylvania State University, University Park, PA 16802.
Mark Horn
Affiliation:
Electronic Materials and Processing Research Laboratory, The Pennsylvania State University, University Park, PA 16802.
S. Ashok
Affiliation:
Electronic Materials and Processing Research Laboratory, The Pennsylvania State University, University Park, PA 16802.
Get access

Abstract

Alleviating transient enhanced diffusion (TED) is one among several issues that has to be solved to realize deep sub-micron CMOS. In this paper we present the influence of hydrogen plasma on TED of boron, along with deep level transient spectroscopic (DLTS) studies on defect evolution as a function of anneal temperature. The studies reveal that TED monotonically increases as a function of anneal temperature up to 650°C, where maximum TED occurs. Further increase in anneal temperature reveals TED reduction. The DLTS reveals a corresponding increase in defect density up to 650°C and then decreases when annealed at 850°C for the same amount of time.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 610: Symposium B – Si Front End Processing - Physics & Technology..II , 2000 , B5.7
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1 National Technology Roadmap for Semiconductors, SIA, San Jose 1997.Google Scholar
2 Stolk, P.A.et al, J. Appl. Phys. 81 (9), 61 (1997)10.1063/1.364452Google Scholar
3 Agarwal, A.et al, Appl. Phys. Lett. 71, (21) 3141 (1997)10.1063/1.120552Google Scholar
4 Scholtz, R.et al, Appl.Phys. Lett., 72, 200 (1998)10.1063/1.120684Google Scholar
5 Agarwal, A., et al. Mat. Res. Soc. Symp. Proc. 568, 19 (1999)10.1557/PROC-568-19Google Scholar
6 Nazarov, A. N., et al. Phys. Rev. B, Vol 58 No. 7, 3522 (1998)10.1103/PhysRevB.58.3522Google Scholar
7 Singh, R. et l., J. Appl. Phys. 55 (4), 867 (1984)10.1063/1.333183Google Scholar
8 Yokota, K., et al. Ion Imp. Tech. Proc, 95 (1999)Google Scholar
9 Aspar, B., et al. Mat. Res. Soc. Symp. Proc. 510, 381 (1998).10.1557/PROC-510-381Google Scholar