Hostname: page-component-745bb68f8f-d8cs5 Total loading time: 0 Render date: 2025-02-10T12:12:30.488Z Has data issue: false hasContentIssue false
  • English
  • Français

Bonded-H in Gate Dielectrics Deposited by Plasma Assisted Chemical Vapor Deposition and Subjected to Rapid Thermal Annealing

Published online by Cambridge University Press:  10 February 2011

G. Lucovsky ,
H. Niimi  and
K. Koh
G. Lucovsky
Affiliation:
Departments of Physics, Materials Science and Engineering and Electrical and Computer Engineering, North Carolina State University, Raleigh, NC 27695-8202
H. Niimi
Affiliation:
Departments of Physics, Materials Science and Engineering and Electrical and Computer Engineering, North Carolina State University, Raleigh, NC 27695-8202
K. Koh
Affiliation:
Departments of Physics, Materials Science and Engineering and Electrical and Computer Engineering, North Carolina State University, Raleigh, NC 27695-8202
Get access

Abstract

The incorporation of bonded nitrogen into ultra thin SiO2 gate dielectrics has become an important technology issue. Nitrogen atoms bonded in the immediate vicinity of the Si-SiO2 interface improve device reliability in n-channel field effect transistors. N- atom incorporation at the monolayer concentration range has been achieved by remote plasma assisted oxidation in N2O at 300°C. The incorporation mechanism and the stability of bonded-N are discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 429: Symposium N – Rapid Thermal and Integrated Processing V , 1996 , 233
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Saks, N.S., et al., Appl. Phys. Lett. 67, 374 (1995).Google Scholar
[2] Green, M.L. et al., Appl. Phys. Lett. 65, 848 (1994).Google Scholar
[3] Han, L.K. et al., 1995 SDDM, PC 1–2, 261 (1995).Google Scholar
[4] Lee, D.R., et al., J. Vac. Sci. Technol. A13, 607 (1995).Google Scholar
[5] Lee, D.R., et al., J. Vac. Sci. Technol. B13, 1778 (1995).Google Scholar
[6] Bjorkman, C.H., et al., J. Vac. Sci. Technol. A11, 964 (1993).Google Scholar
[7] Jing, Z., et al., J. Vac. Sci. Technol. B13, 1613 (1995); and G. Lucovsky, et al, J. Vac. Sci. Technol. B 14 (1996), in press.Google Scholar