No CrossRef data available.
Published online by Cambridge University Press: 10 February 2011
Of all applications for which field emitter arrays (FEAs) are being designed, RF vacuum microelectronics is the most technically challenging application. The current density is typically three orders of magnitude larger than that required for displays (which require < 0.1 A/cm2). Due to their high current density capabilities and instant turn-on, FEAs may be a promising alternative to thermionic emitters for use in Inductive Output Amplifiers (IOAs). An analytical model of a field emitter is used to estimate Fowler Nordheim A and B parameters, effective resistance and capacitance of the array under several GHz modulation, signal propogation lengths, total current and current density, and effects of emitter non-uniformity on the basis of array geometry and materials. Estimates of inductance, resistance, and capacitance are made to estimate the drive power required to produce a bunched electron beam for Inductive Output Amplifier applications. An electronic efficiency of 32% with 15 dB gain may be possible from an array producing 260 mA peak, 71 mA average, current at 10 GHz using a TWT helix 1.51 cm long.
To send this article to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about sending to your Kindle. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save this article to your Dropbox account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Dropbox account. Find out more about saving content to Dropbox.
To save this article to your Google Drive account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Google Drive account. Find out more about saving content to Google Drive.