Hostname: page-component-745bb68f8f-mzp66 Total loading time: 0 Render date: 2025-02-04T14:07:13.311Z Has data issue: false hasContentIssue false
  • English
  • Français

Sinter-Forging of Nanocrystalline TiO2

Published online by Cambridge University Press:  25 February 2011

H.J. HÖfler  and
R.S. Averback
H.J. HÖfler
Affiliation:
Department of Materials Science and Engineering and Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL 61801
R.S. Averback
Affiliation:
Department of Materials Science and Engineering and Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL 61801
Get access

Abstract

Sinter-forging experiments were performed on cylindrical samples of n-TiO2 at various stresses and temperatures and with varying initial densities. The results are described on the basis of a constitutive law similar to creep deformation of dense bodies. The activation enthalpy measured is consisted with a grain boundary diffusion limited process, whereas the stress exponent found excludes simple diffusional creep. Furthermore, a threshold stress was found to exist. The results are discussed in terms of existing models and it is shown that the threshold stress can be explained in terms of the creation of additional surface area due to grain boundary sliding.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 286: Symposium J – Nanophase and Nanocomposite Materials , 1992 , 9
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Hahn, H. and Averback, R.S., J. Am. Cer Soc. 74 (11), 2918 (1991).Google Scholar
2 Averback, R.S., Höfler, H.J., Hahn, H. and Logas, J., NanoStruct. Mat., 1, 173 (1992).Google Scholar
3 Averback, R.S., Hahn, H., Hiofler, H.J., Logas, J. and Shen, T.C., Mat. Res. Soc. Symp. 153, 3 (1989).Google Scholar
4 Langdon, T.G., in Superplastic Forming of Structural Alloys, Eds.: Paton, N.E. and Hamilton, C.H., Met. Soc of AIME, (1982), pp 27–40.Google Scholar
5 Uchic, M., Höfler, H.J., Flick, W.J., Tao, R., Kurath, P. and Averback, R.S., Scr. Metall. Mater. 26, 791 (1991).Google Scholar
6 Tao, R. and Averback, R.S., unpublished.Google Scholar
7 Coble, R.L., J. Appl. Phys. 34, 1679 (1963).Google Scholar
8 Casagranda, A. and Evans, A.G., subm. to J. Am. Cer. Soc.Google Scholar
9 Venkatachari, K.R. and Raj, R., J. Am. Cer. Soc. 69 (6), 499 (1986).Google Scholar
10 Wang, J. and Raj, R., J. Am. Cer. Soc. 74 (8), 1959 (1991).Google Scholar
11 Du, Z.-Z. and Cocks, A.C.F., Acta Metall. Mater. 40, 1969 (1992).Google Scholar
12 Helle, A.S., Easterling, K.E. and Ashby, M.F., Acta Metall. 33, 2163 (1985).Google Scholar
13 Höfler, H.J and Averback, R.S, to be published.Google Scholar