Hostname: page-component-669899f699-swprf Total loading time: 0 Render date: 2025-04-25T20:52:50.020Z Has data issue: false hasContentIssue false
  • English
  • Français

Selective Si/SiGe Heterostructures for Advanced CMOS and BiCMOS Technologies

Published online by Cambridge University Press:  10 February 2011

J. L. Regolini
J. L. Regolini*
Affiliation:
FRANCE TELECOM CNET Grenoble BP 98, 38243, Meylan, FRANCE
Get access

Abstract

New device architectures for advanced Integrated Circuits (IC) have been studied within the frame of our GRESSI Program through the technological development of the well known but less implemented low temperature selective epitaxial Si and SiGe films. High performance IC manufacturing requirements, such as large diameter wafer uniformity, reproducibility, throughput and reliability can be met by commercial integrated processing, single wafer cluster tools.

Using an industrially available CVD single wafer reactor, special care has been taken to integrate these films into advanced CMOS and BiCMOS processes with a minimum of drawbacks. Indeed, the Si and SiGe growth rate dependence on filling ratio as well as full selectivity are major issues. The loading effect as a function of temperature, gas mixture, Ge and dopant incorporation has been studied and optimized for these applications.

Finally, device results are compared between conventional and developed architectures showing real improvements with minimum process modifications.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 470: Symposium F – Rapid Thermal and Integrated Processing IV , 1997 , 99
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

[1].- Goulding, M. R., Mat. Sci. and Engin. B17, 47 (1993)Google Scholar
[2].- Iyer, S. S., Inti. Conf. on Solid State Dev. and Materials Extended Abstracts, Yokohama, 156 (1991)Google Scholar
[3].- Iwai, H., Proc. of the European Solid State Device Research Conference 96, p. 45 (1996)Google Scholar
[4].- Verdonckt-Vandebroek, S., Crabbe, E. F, Meyerson, B. S., Harame, D. L., Restie, P. J., Stork, J. and Johnson, J. B., IEEE-ED 41, 90 (1994)Google Scholar
[5].- O'Neill, A. G. and Antoniades, D. A., IEEE-ED 43, 911 (1996)Google Scholar
[6].- Bouillon, P., Skotnicki, T., Bodnar, S., Morin, C., Regolini, J. L., Gouagout, P. and Dollfus, P.,, Proc. of the European Solid State Device Research Conference 96, p. 473 (1996)Google Scholar
[7].- Skotnicki, T., Proc. of the European Solid State Device Research Conference 96 p. 505 (1996)Google Scholar
[8].- Vook, D., Kamins, T. I, Burton, G., Vande Voorde, P. J., Wang, H.-H., Cohen, R., Lin, J., Pettengill, D. F., Yu, P.-K., Rosner, S. J., Turner, J. E., Laderman Horng-Sen Fu, S. S. and Wang, A. S., IEEE-ED 41, 1013 (1994)Google Scholar
[9].- Ishitani, A., Endo, N. and Tsuya, H., Jpn. J. Appl. Phys. 23 (1984) L391 Google Scholar
[10].- Vescan, L., Mat. Sci. and Engin. B28, 1 (1994)Google Scholar
[11].- Regolini, J. L., Bensahel, D., Mercier, J. and Scheid, E., J. Crystal Growth 96, 505 (1989)Google Scholar
[12].- Ito, S., Nakamura, T. and Nishikawa, S., J. Appl. Phys. 78, 2716 (1995)Google Scholar
[13].- Bodnar, S., de Berranger, E., Bouillon, P., Mouis, M., Skotnicki, T. and Regolini, J. L., Accepted J. Vac. Sci and Tech.Google Scholar
[14].- Noda, K., Uchida, T., Tatsumi, T., Aoyama, T., Nakajima, K., Miyamoto, H., Hashimoto, Y. and Sasaki, I., Digest of VLSI 94 Tech. Symp., p. 19Google Scholar
[15].- Crabbé, E., Meyerson, B., Harame, D., Stork, J., Megdanis, A., Cotte, J., Chu, J., Gilbert, M., Stanis, C., Comfort, J., Patton, G. and Subbanna, S., IEEE-Trans. on Electron Devices, 40(11), 2100, (1993)Google Scholar
[16].- Kasper, E., Kibbel, H., Herzog, H. J. and Gruhle, A., Jpn. J. Appl. Phys. 33, Part 1 (4B), 2415 (1994)Google Scholar
[17].- de Berranger, E., Bodnar, S., Chantre, A., Kirtsch, J., Monroy, A., Laurens, M., Granier, A., Regolini, J. L. and Mouis, M., Proc. of the European Solid State Device Research Conference 96, p. 433 (1996)Google Scholar