Hostname: page-component-6dbcb7884d-wnk8j Total loading time: 0 Render date: 2025-02-14T01:48:22.629Z Has data issue: false hasContentIssue false
  • English
  • Français

Processing High Quality Toughened Zirconia Ceramics by Controlling the Chemistry at the Particle-Particle Interface

Published online by Cambridge University Press:  21 February 2011

S.T. Thuraisingham  and
J.L. Henshall
S.T. Thuraisingham
Affiliation:
Colloids-ln-lndustry, P.O.Box 263, Concord, MA 01742-0263, USA
J.L. Henshall
Affiliation:
School of Engineering, University of Exeter, Exeter, EX4 4QF, England
Get access

Abstract

A novel lower cost wet-processing technique, for producing toughened zirconia ceramics with complex geometries, is presented. It is based mainly on modifications to the particle surface chemistry. The sintered materials produced so far are significantly harder (ca 50%) as well as being tougher (ca 10%) than a commercial CeTZP.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 318: Symposium Ca – Interface Control of Electrical, Chemical, and Mechanical Properties , 1993 , 343
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Onoda, G.Y. Jr, and Hench, L.L., Ceramic Processing Before Firing, (Wiley-Interscience Publishers, New York, 1978).Google Scholar
2 Goodwin, J.W., Ceram. Bull. 69, 1694 (1990).Google Scholar
3 Ulrich, D.R., Chem. & Eng. News, 68, 28 (1990).Google Scholar
4 Leong, Y-K. and Boger, D.V., J.Rheol. 35, 149 (1991).Google Scholar
5 Hart, A.M., Peters, B.C., PIonka, J.H., Werst, W.H. Jr. and Macki, J.M., Chem.Eng.Progr. 85, 32 (1989)Google Scholar
6 Wakeman, R.J., Sabri, M.N. and Tarleton, E.S., Powd. Technol. 65, 283 (1991).Google Scholar
7 Stevens, R., An Introduction To Zirconia, 2nd ed. (Magnesium-Elektron Ltd, Twickenham, England, 1986)Google Scholar
8 Wakeman, R.J., Thuraisingham, S.T. and Tarleton, E.S., Filtrn. Sepn, 26, 277 (1989).Google Scholar
9 Sato, T. and Shimada, M., Am. Ceram. Soc. Bull. 64 (10), 1382 (1985).Google Scholar
10 Henshall, J.L. and Thuraisingham, S.T. in Fabrication Science and Technology, edited by Thompson, D.P. (Brit. Ceram. Proc. 50, 1993) pp. 173–179.Google Scholar
11 Anstis, G.R., Chantikul, P., Lawn, B.R. and Marshall, D.B., J.Am.Ceram.Soc. 64, 533 (1981).Google Scholar
12 M-O.Guillou, , Henshall, J.L., Hooper, R.M. and Carter, G.M., J. Hard Mater. 3, 421 (1992).Google Scholar
13 Tsukuma, K. and Shimada, M., J.Mater. Sci. 20, 1178 (1985).Google Scholar
14 Duh, J.G., Dai, H.T. and Chiou, B.S., J. Am. Ceram. Soc. 71, 813 (1988).Google Scholar
15 Liniger, E.G. and Raj, R., Sci. of Sintering, 21, 109 (1989).Google Scholar
16 Wang, J., Li, H-P., Stevens, R., Ponton, C.B. and Marquis, P.M. in Fabrication Science and Technology, edited by Thompson, D.P. (Brit. Ceram. Proc. 50, 1993) pp. 161–171.Google Scholar
17 Pillar, R.C., Friend, S.J., Davidge, R.W., Sleurs, J. and Gilissen, R. in Fabrication Science and Technology, edited by Thompson, D.P. (Brit. Ceram. Proc. 50, 1993) pp. 229–245.Google Scholar
18 Birkby, I., Managing Director/Chief Executive, DYNAMIC-CERAMIC Ltd, Burslem, Stoke-on-Trent, England (private communication, 1993).Google Scholar