Hostname: page-component-745bb68f8f-mzp66 Total loading time: 0 Render date: 2025-02-04T16:45:20.216Z Has data issue: false hasContentIssue false
  • English
  • Français

Process Uniformity and Electrical Characteristics of Thin Gate Dielectrics Grown by Ramped-Temperature Transient Rapid Thermal Oxidation of Silicon

Published online by Cambridge University Press:  25 February 2011

Mehrdad M. Moslehit  and
Ahmad Kermani
Mehrdad M. Moslehit
Affiliation:
Semiconductor Process And Design Center, Texas Instruments, Dallas, Texas 75265
Ahmad Kermani
Affiliation:
Peak Systems, Fremont, California 94538
Get access

Abstract

Rapid thermal oxidation (RTO) of Si using transient linearly-ramped-temperature saw-toothed (LRT-ST) and triangular (LRT-TA) thermal cycles has been examined through evaluations of the process uniformity, slip dislocation patterns, and electrical characteristics of MOS devices. The strong effects of the thermal cycle parameters on process uniformity and slips indicate that the overall performance of an RTP tool must be specified both under the steady-state and transient thermal cycles. The electrical characteristics of MOS devices with LRT-grown gate oxides are comparable to those for devices with oxides grown by the trapezoidal thermal cycles.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 146: Symposium B – Rapid Thermal Annealing/Chemical Vapor Deposition and Integrated Processing , 1989 , 319
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Ritz, K., Delfino, M., Cooper, C. III, and Powell, R., J. Appl. Phys. 60, 800 1986.Google Scholar
[2] Bentini, G., Correra, L., and Donolato, C., J. Appl. Phys. 56, 2922 1984.Google Scholar
[3] Akiyama, N., Inoue, Y., and Suzuki, T., Jpn. J. Appl. Phys. 25, 1619 1986.Google Scholar
[4] Matsuba, I., Mokuya, K., and Aoshima, T., IEDM Tech. Dig., 530 (1986).Google Scholar
[5] Lord, H., IEEE Trans. on Semiconductor Manufacturing 1, (1988).Google Scholar
[6] Moslehi, M., Appl. Phys. A 46, 255 1988.Google Scholar
[7] Moslehi, M., Kermani, A., and Saraswat, K., Appl. Phys. Lett. 53, 1104 1988.Google Scholar