Hostname: page-component-6dbcb7884d-64ff6 Total loading time: 0 Render date: 2025-02-14T01:47:31.296Z Has data issue: false hasContentIssue false
  • English
  • Français

A Preliminary Research on the Mechanical Properties of TiAl+Ti5Si3 Dual Phase Alloys

Published online by Cambridge University Press:  22 February 2011

Lanting Zhang ,
Guohua Qiu  and
Jiansheng Wu
Lanting Zhang
Affiliation:
Department of Materials Science, Shanghai Jiao Tong University, Shanghai 200030, P. R. China
Guohua Qiu
Affiliation:
Department of Materials Science, Shanghai Jiao Tong University, Shanghai 200030, P. R. China
Jiansheng Wu
Affiliation:
Department of Materials Science, Shanghai Jiao Tong University, Shanghai 200030, P. R. China
Get access

Abstract

A sufficient Si addition to TiAl matrix has led to TiAl + Ti5Si3 dual phase alloys, showing coupled-growth microstructure. Compression tests at R.T. as well as high temperatures indicated that the yield stress increased with increasing Ti5Si3 volume fraction, and decreased at higher temperature. The reinforcement from Ti5Si3 phase was obvious, while high Si and Al contents resulted in low ductility. The fracture surfaces were quasi-cleavage. Further research should concern with the adjustment of the shape and amount of the second phase.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 364: Symposium L – High-Temperature Ordered Intermetallic Alloys–VI , 1994 , 499
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Wu, J.S., Beaven, P.A., Wagner, R., Hartig, Ch. and Seeger, J., in High-Temperature Ordered Intermetallic Alloys III, eds. Liu, C.T. et al, (MRS, 133, 1989) pp.761.Google Scholar
2. Wu, J.S., Beaven, P.A. and Wagner, R., Scripta Metall. Mater. 24, 207 (1990).Google Scholar
3. Wu, J.S., Qiu, G.H. and Zhang, L.T., Scripta Metall. Mater. 30, 213 (1994).Google Scholar
4. Kim, Y-W., JOM, 41, 24 (1989).Google Scholar
5. Vehoff, H., Reuss, S., Vogt, W. and Specht, P., in Structural Intermetallics, eds. Darolia, R. et al, (The Minerals, Metals and Materials Society, 1993) pp. 657.Google Scholar
6. Frommeyer, G., Rosenkranz, R. and Ludecks, Christa, Z. Metallkde, 81, 307 (1990)Google Scholar