Hostname: page-component-745bb68f8f-5r2nc Total loading time: 0 Render date: 2025-02-10T11:43:09.668Z Has data issue: false hasContentIssue false
  • English
  • Français

A Performance Based, Multi-Process Cost Model for Solid Oxide Fuel Cells

Published online by Cambridge University Press:  11 February 2011

Heather Benson-Woodward ,
Mark Koslowske ,
Randolph Kirchain  and
Isa Bar-On
Heather Benson-Woodward
Affiliation:
Mechanical Engineering Department, Worcester Polytechnic Institute Worcester, MA 01609, USA.
Mark Koslowske
Affiliation:
Mechanical Engineering Department, Worcester Polytechnic Institute Worcester, MA 01609, USA.
Randolph Kirchain
Affiliation:
Department of Materials Science and Engineering and Engineering Systems Division, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.
Isa Bar-On
Affiliation:
Mechanical Engineering Department, Worcester Polytechnic Institute Worcester, MA 01609, USA.
Get access

Abstract

Cost effective high volume manufacture (HVM) is a major challenge to the success of solid oxide fuel cells (SOFCs). More than fifteen processing methods have been reported in the literature many of which could be used in various combinations to create the desired product characteristics. Modeling tools are needed to aid in the selection of the appropriate process combination prior to making expensive investment decisions.

This paper describes the development of a multi-process cost model that permits the comparison of manufacturing cost for different processing combinations and various materials. Two specific processing methods are discussed, tape casting and screen printing.

The results are compared with data and experience from the fuel cell and electronic packaging industries. Initial comparisons show good agreement with this experience base. Sensitivity of manufacturing costs to SOFC performance requirements such as maximum power density and operation temperature is investigated.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 756: Symposia EE/FF – Solid-State Ionics – Materials for Fuel Cells and Fuel Processors , 2002 , FF4.10
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. SOFC VI, 127–640 (1999).Google Scholar
2. SOFC VII, 275–769, 875–1089 (2001).Google Scholar
3. Larminie, J., Dicks, A., Fuel Cell Systems Explained, (Wiley and Sons, NY, 2001), pp.124–180.Google Scholar
4. Pham, A., Chung, B., Haslam, , Lenz, D., See, E., Glass, R., SOFC VII, 149–154 (2001).Google Scholar
5. Primdahl, S., Jorgensen, M.J., Bagger, C., Kindl, B., SOFC VI, 793–802 (1999)Google Scholar
6. Will, J., Mitterdorfer, A., Kleinlogel, C., Perednis, D., Gaukler, L.J., Solid State Ionics 131, 79–96 (2000).Google Scholar
7. Kim, J.W., Virkar, A.V., SOFC VI, 830–839 (1999).Google Scholar
8. Kim, J.W., Virkar, A.V., Fung, K.Z., Mehta, K., Singhal, S.C., Journal of the Electrochemical Society 146 (1), 69–78 (1999).Google Scholar
9. Chan, S.H., Khor, K.A., Xia, Z.T., Journal of Power Sources 93, 130–140 (2001).Google Scholar
10. Charpentier, P., Fragnaud, P., Schleich, D.M., Gehain, E., Solid State Ionics 135, 373–380 (2000).Google Scholar
11. Khandar, A., Elangovan, S., Hartvigsen, J., Rowley, D., Privette, R., Tharp, M., SOFC VI, 88–94 (1999).Google Scholar
12. Virkar, A.V., Chen, J., Tanner, C.W., Kim, J.W., Solid State Ionics 131, 189–198 (2000).Google Scholar
13. Okamura, K., Aihara, Y., Ito, S., Kawasaki, S., Journal of Thermal Spray Technology 9(3), 354–359 (2000).Google Scholar
14. Clark, J.P., Roth, R., Field, F.R., Techno-economic issues in materials selection, in: Materials Selection and Design, 1997, PP. 256–265.Google Scholar
15. http://www.netl.doe.gov/publications/proceedings/01/seca/adlstack.pdf Google Scholar
16. Coors Tek, Personal communication.Google Scholar