No CrossRef data available.
Published online by Cambridge University Press: 21 March 2011
A new approach is proposed to obtain fast crystallizing materials based on a conventional GeSbTe alloy for rewritable phase change optical data storage. By means of co-sputtering, Ge1Sb2Te4alloy was mixed with Sn1Bi2Te4alloy so as to form pseudo-binary alloys (Ge1Sb2Te4)1-x(Sn1Bi2Te4)x (x is a mole fraction). From structural and optical analyses of the co- sputtered and annealed alloy films, the formation of stable crystalline single phases was observed along with a Vegard's law behavior, suggesting a homogeneous mixing of the two alloys. By use of a 4 layered disk with (Ge1Sb2Te4)0.85(Sn1Bi2Te4)0.15 recording layer, a preliminary test of writing and erasing was carried out and the results were compared with the case of the disk with Ge1Sb2Te4recording layer. The (Ge1Sb2Te4)0.85(Sn1Bi2Te4)0.15 recording layer was found to yield markedly higher erasibility, especially with increasing disk linear velocity.
To send this article to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about sending to your Kindle. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save this article to your Dropbox account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Dropbox account. Find out more about saving content to Dropbox.
To save this article to your Google Drive account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Google Drive account. Find out more about saving content to Google Drive.