Hostname: page-component-669899f699-7tmb6 Total loading time: 0 Render date: 2025-04-26T09:46:12.882Z Has data issue: false hasContentIssue false
  • English
  • Français

Micromachined Polysilicon Resonating Xylophone Bar Magnetometer: Resonance Characteristics

Published online by Cambridge University Press:  10 February 2011

J. L. Lamb ,
D. K. Wickenden ,
J. L. Champion ,
R. B. Givens ,
R. Osiander  and
T. J. Kistenmacher
J. L. Lamb
Affiliation:
The Johns Hopkins University Applied Physics Laboratory, Laurel, MD 20723-6099
D. K. Wickenden
Affiliation:
The Johns Hopkins University Applied Physics Laboratory, Laurel, MD 20723-6099
J. L. Champion
Affiliation:
The Johns Hopkins University Applied Physics Laboratory, Laurel, MD 20723-6099
R. B. Givens
Affiliation:
The Johns Hopkins University Applied Physics Laboratory, Laurel, MD 20723-6099
R. Osiander
Affiliation:
The Johns Hopkins University Applied Physics Laboratory, Laurel, MD 20723-6099
T. J. Kistenmacher
Affiliation:
The Johns Hopkins University Applied Physics Laboratory, Laurel, MD 20723-6099
Get access

Abstract

A miniaturized, polysilicon version of a xylophone bar magnetometer (with dimensions on the order of microns) has been fabricated by microelectromechanical systems (MEMS) processing techniques. All devices tested to date have performed extremely well in static magnetic fields and exhibit mechanical quality factors, Q, of up to 30,000 at reduced pressures. The resonance frequency of the fundamental flexural mode of vibration of these polysilicon xylophone bars has been found to be a sensitive function of the torsional stiffness of the support arms, in quantitative accord with an analytical model based on Bernoulli-Euler beam theory.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 605: Symposium MM – Materials Science of Microelectromechanical Systems Devices II , 1999 , 211
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Givens, R. B., Murphy, J. C., Osiander, R., Kistenmacher, T. J., and Wickenden, D. K., Appl. Phys. Lett. 69, 2755 (1996).10.1063/1.117665Google Scholar
2. Givens, R. B., Wickenden, D. K., Oursler, D. A., Osiander, R., Champion, J. L., and Kistenmacher, T. J., Appl. Phys. Lett. 74, 1472 (1999).10.1063/1.123584Google Scholar
3. Wickenden, D. K., Champion, J. L., Givens, R. B., Kistenmacher, T. J., Lamb, J. L., and Osiander, R., SPIE Conf. Proc. Micromachined Devices & Components V 3876, 267 (1999).Google Scholar
4. Young, W.C., Roark s Formulas for Stress & Strain, Sixth Edition, (McGraw-Hill, New York, 1989).Google Scholar
5.Cronos Integrated Microsystems, Inc. (MCNC MEMS Technology Applications Center), 3021 Cornwallis Road, P. O. Box 12889, Research Triangle, NC 20779.Google Scholar
6. Sherman, D., “An Investigation of MEMS Anchor Design for Optimal Stiffness Damping,” Master's Project, University of California, Berkeley, May 1996.Google Scholar