No CrossRef data available.
Published online by Cambridge University Press: 19 October 2011
The anodic dissolution of UO2 has been studied at 60°C and the results compared to previous observations at 22°C. The rate of oxidation / dissolution was determined electrochemically at constant potentials in the range -500 mV to 500 mV (vs. SCE). The composition of the electrochemically oxidized surface was determined by X-Ray Photoelectron Spectroscopy (XPS). The onset of oxidation (UO2 → UO2+x) occurred at approximately the same potential (-400 mV) at both temperatures. However, the conversion of UV to UVI, and hence to soluble UO22+, was accelerated by temperature. This acceleration of dissolution caused the development of acidity at localized sites on the fuel surface at lower (less oxidizing) potentials (≥ 100 mV) at 60°C than at 22°C (≥ 350 mV).
To send this article to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about sending to your Kindle. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save this article to your Dropbox account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Dropbox account. Find out more about saving content to Dropbox.
To save this article to your Google Drive account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Google Drive account. Find out more about saving content to Google Drive.